| Db min - Min OR shoulder diameter | 255 mm | ||
| Cb - Min clearance | 11 mm | ||
| r1a - Max fillet radius | 2,5 mm | ||
| C - Outer ring width | 38 mm | ||
| a - Charge load application point | 51,5 mm | ||
| r1s - Min fillet radius | 3 mm | ||
| C - Dynamic load | 500 kN | ||
| Cu - Fatigue limit load | 59 kN | ||
| e - Coefficient | 0,44 | ||
| Y2 - Upper axial load coefficient | 1,38 | ||
| Nlim - Grease lubrication limit speed | 1300 tr/min | ||
| Tmax - Max operating temperature | 120 °C | ||
| BPFI - Characteristic inner ring frequency | 10,8 Hz | ||
| BSF - Characteristic rolling element frequency | 6,888 Hz | ||
| db min - Min IR shoulder diameter | 168 mm | ||
| Da max - Max shoulder diameter OR | 256 mm |
| Ca - Min clearance | 7 mm | ||
| ra max - Max fillet radius | 3 mm | ||
| Brand | NTN | ||
| T - Total width | 49 mm | ||
| rs - Min fillet radius | 4 mm | ||
| ISO 355 reference | T4GB150 | ||
| C0 - Static load | 605 kN | ||
| A2 - Rating life coefficient | 1 | ||
| Y0 - Static axial load coefficient | 0,76 | ||
| Nlim - Oil lubrication limit speed | 1700 tr/min | ||
| Tmin - Min operating temperature | -40 °C | ||
| BPFO - Characteristic outer ring frequency | 8,2 Hz | ||
| FTF - Characteristic cage frequency | 0,432 Hz | ||
| da max - Max shoulder diameter IR | 175 mm | ||
| Da min - Min shoulder diameter OR | 234 mm |
