Especificaciones
Ancho | 20mm |
---|---|
Diámetro interior | 45mm |
Diámetro exterior | 75mm |
---|---|
Peso | 350g |
Bore diameter | d | 45 | mm |
Width, inner ring | Bi | 20 | mm |
Width, total | T | 20 | mm |
Basic static load rating, radial | C0r | 86,000 | |
Limiting speed | nG | 11,400 |
Outside diameter | D | 75 | mm |
Width, outer ring | B | 15,50 | mm |
Basic dynamic load rating, radial | Cr | 72,000 | |
Fatigue load limit, radial | Cur | 13,500 | |
Thermal speed rating | nϑr | 5,400 |
Maximum diameter of shaft shoulder | da max | 51 | mm |
Maximum diameter of housing shoulder | Da max | 69 | mm |
Maximum fillet radius of shaft | ra max | 1 | mm |
Minimum diameter of shaft shoulder | db min | 51 | mm |
Minimum axial space | Ca min | 4,50 | mm |
Minimum chamfer dimension of inner ring back face | r1, 2 min | 1 | mm |
Distance between the apexes of the pressure cones | a | 17 | mm |
Minimum chamfer dimension of outer ring back face | r3, 4 min | 1 | mm |
Guidance rib diameter of inner ring | d1 | 62,20 | mm |