| Bore diameter | d | 110 | mm |
| Width, inner ring | Bi | 25 | mm |
| Width, total | T | 25 | mm |
| Basic static load rating, radial | C0r | 231,000 | |
| Limiting speed | nG | 4,550 |
| Outside diameter | D | 150 | mm |
| Width, outer ring | B | 20 | mm |
| Basic dynamic load rating, radial | Cr | 133,000 | |
| Fatigue load limit, radial | Cur | 27,500 | |
| Thermal speed rating | nϑr | 2,500 |
| Maximum diameter of shaft shoulder | da max | 118 | mm |
| Maximum diameter of housing shoulder | Da max | 141 | mm |
| Maximum fillet radius of shaft | ra max | 1,50 | mm |
| Minimum diameter of shaft shoulder | db min | 117 | mm |
| Minimum axial space | Ca min | 5 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 1,50 | mm |
| Distance between the apexes of the pressure cones | a | 26 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 1,50 | mm |
| Guidance rib diameter of inner ring | d1 | 130,90 | mm |
| Fabricante | Referencia |
|---|---|
| ISO | T2CC110 |
| NSK | 32922 |
| SKF | 32922 |
