| Outside diameter | D | 210 | mm |
| Width, outer ring | B | 30 | mm |
| Basic dynamic load rating, radial | Cr | 285,000 | |
| Fatigue load limit, radial | Cur | 54,000 | |
| Thermal speed rating | nϑr | 2,040 |
| Width, inner ring | Bi | 38 | mm |
| Width, total | T | 38 | mm |
| Basic static load rating, radial | C0r | 495,000 | |
| Limiting speed | nG | 3,200 | |
| Bore diameter | d | 150 | mm |
| Maximum diameter of shaft shoulder | da max | 162 | mm |
| Maximum diameter of housing shoulder | Da max | 201 | mm |
| Maximum fillet radius of shaft | ra max | 2,50 | mm |
| Minimum diameter of shaft shoulder | db min | 160 | mm |
| Minimum axial space | Ca min | 8 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 2,50 | mm |
| Distance between the apexes of the pressure cones | a | 36 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 2 | mm |
| Guidance rib diameter of inner ring | d1 | 177,80 | mm |
| Fabricante | Referencia |
|---|---|
| TIMKEN | 32930-M (TIMKEN) |
| ISO | T2DC150 |
| NSK | 32930 |
