t | 39 mm | ||
r(min.) | 2 mm | ||
Basic load ratings : Cr | 290 kN | ||
Fatigue load limit : Cu | 59.0 kN | ||
Limiting speeds(Oil lub.) | 3200 min-1 | ||
Constant e | 0,29 | ||
Axial load factors : Y0 | 1,15 | ||
Da(max.) | 141 mm | ||
db(min.) | 143 mm | ||
Sb(min.) | 6.5 mm | ||
rb(max.) | 1.5 mm |
C | 32.5 mm | ||
r1(min.) | 1.5 mm | ||
Basic load ratings : C0r | 397 kN | ||
Limiting speeds(Grease lub.) | 2400 min-1 | ||
Load center spread : a | 28.6 mm | ||
Axial load factors : Y1 | 2,09 | ||
db(max.) | 108 mm | ||
da(min.) | 135 mm | ||
Sa(min.) | 7 mm | ||
ra(max.) | 2 mm |
Fabricante | Referencia |
---|---|
FAG | 33020 (FAG) |