| Bore diameter | d | 2,36 | mm |
| Width | B | 0,87 | mm |
| Basic static load rating, radial | C0r | 10,116.906 | |
| Limiting speed | nG | 10,800 |
| Outside diameter | D | 4,33 | mm |
| Basic dynamic load rating, radial | Cr | 13,938.849 | |
| Fatigue load limit, radial | Cur | 708.183 | |
| Reference speed | nϑr | 6,200 |
| Minimum diameter of shaft shoulder | da min | 2,72 | mm |
| Maximum diameter of housing shoulder | Db max | 4,11 | mm |
| Maximum fillet radius of housing | ra1 max | 0,04 | mm |
| Maximum diameter of housing shoulder | Da max | 101 | mm |
| Maximum fillet radius of shaft | ra max | 0,06 | mm |
| Minimum chamfer dimension | rmin | 0,04 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 3,16 | mm |
| Contact angle | α | 40 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 3,58 | mm |
| Distance between the apexes of the pressure cones | a | 1,85 | mm |
