Especificaciones
Ancho | 17mm |
---|---|
Diámetro interior | 25mm |
Diámetro exterior | 62mm |
---|---|
Peso | 230g |
Bore diameter | d | 25 | mm |
Width | B | 17 | mm |
Basic static load rating, radial | C0r | 15,800 | |
Limiting speed | nG | 15,800 |
Outside diameter | D | 62 | mm |
Basic dynamic load rating, radial | Cr | 30,000 | |
Fatigue load limit, radial | Cur | 1,100 | |
Reference speed | nϑr | 9,800 |
Minimum diameter of shaft shoulder | da min | 32 | mm |
Maximum diameter of housing shoulder | Db max | 57,80 | mm |
Maximum fillet radius of housing | ra1 max | 0,60 | mm |
Maximum diameter of housing shoulder | Da max | 55 | mm |
Maximum fillet radius of shaft | ra max | 1 | mm |
Minimum chamfer dimension | rmin | 0,60 | mm |
Shoulder diameter on inner ring wide side face | d1 | 39,90 | mm |
Contact angle | α | 40 | ° |
Shoulder diameter on outer ring wide side face | D1 | 48 | mm |
Distance between the apexes of the pressure cones | a | 27 | mm |