Especificaciones
Ancho | 21mm |
---|---|
Diámetro interior | 35mm |
Diámetro exterior | 80mm |
---|---|
Peso | 498g |
Shoulder diameter on inner ring wide side face | d1 | 53,12 | mm |
Contact angle | α | 40 | ° |
Shoulder diameter on outer ring wide side face | D1 | 63 | mm |
Distance between the apexes of the pressure cones | a | 35 | mm |
Minimum chamfer dimension | rmin | 1 | mm |
Bore diameter | d | 35 | mm |
Width | B | 21 | mm |
Basic static load rating, radial | C0r | 27,500 | |
Limiting speed | nG | 15,500 |
Outside diameter | D | 80 | mm |
Basic dynamic load rating, radial | Cr | 45,500 | |
Fatigue load limit, radial | Cur | 1,910 | |
Reference speed | nϑr | 7,900 |
Minimum diameter of shaft shoulder | da min | 44 | mm |
Maximum diameter of housing shoulder | Db max | 74,40 | mm |
Maximum fillet radius of housing | ra1 max | 1 | mm |
Maximum diameter of housing shoulder | Da max | 71 | mm |
Maximum fillet radius of shaft | ra max | 1,50 | mm |