| Type of actuation | Electric | ||
| Standard nominal flow rate | 800 l/min ... 1.350 l/min | ||
| Operating voltage | 110V AC 120V AC 12V DC 230V AC 240V AC 24V AC 24V DC 48V AC 48V DC Via solenoid coil, must be ordered separately | ||
| Design | Piston gate valve Poppet seat | ||
| Approval | c UL us - Recognized (OL) | ||
| Certificate issuing authority | DNVGL-TAA000011J | ||
| ATEX category dust | II 2D II 3D | ||
| Explosion ignition protection type for dust | Ex ia IIIB T135°C Da Ex mb tb IIIC T80°C Ex t IIIC T80°C Db Ex tb IIIC T100°C Db Ex tb IIIC T135°C Db Ex tc IIIC T95°C X Dc | ||
| Degree of protection | IP65 IP66 IP67 With plug socket To IEC 60529 | ||
| Sealing principle | Soft | ||
| Conforms to standard | VDI/VDE 3845 (NAMUR) | ||
| Type of piloting | Pilot actuated | ||
| Flow direction | Non-reversible | ||
| lap | Positive overlap Underlap | ||
| b value | 0,4 ... 0,5 | ||
| Standard nominal flow rate, exhaust return 4->3 | 110 l/min | ||
| Switching time on | 4 ms ... 35 ms | ||
| Duty cycle | 100% | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Ambient temperature | -20 °C ... 60 °C | ||
| Electrical connection | 3-pin Type A Type B Cable connector M20x1.5 Plugs To EN 175301-803 To industry standard (11 mm) | ||
| Breather connection | Not ducted | ||
| Pneumatic connection, port 2 | NAMUR port pattern | ||
| Pneumatic connection, port 4 | NAMUR port pattern | ||
| Note on materials | RoHS-compliant | ||
| Material housing | Wrought aluminium alloy | ||
| Valve function | 5/2 double solenoid 5/2-way or 3/2-way, convertible 5/3-way, pressurised 5/3 exhausted 5/3 closed |
| Construction width | 32 mm | ||
| pneumatic working port | NAMUR port pattern | ||
| Operating pressure | 1,5 bar ... 10 bar | ||
| Type of reset | Mechanical spring | ||
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) To EU Low Voltage Directive | ||
| ATEX category gas | II 2G II 3G | ||
| Explosion ignition protection type for gas | AEx m II T4 Ex db IIC T4 Gb Ex db IIC T5 Gb Ex ia IIC T6 Ga Ex ia IIC T6...T5 Ga Ex mb IIC T6 Ex nA IIC T5 X Gc | ||
| Explosion ambient temperature | -20°C <= Ta <= +50°C -20°C <= Ta <= +60°C -40°C <= Ta <= +50°C -40°C <= Ta <= +65°C -65°C <= Ta <= +40°C -65°C <= Ta <= +55°C | ||
| Exhaust-air function | With flow control option | ||
| Mounting position | optional | ||
| Manual override | Detenting None Non-detenting Covered | ||
| Pilot air supply | Internal | ||
| Symbol | 00991005 00991018 00991021 00991080 00991082 00991083 00991728 00991831 00991953 00995701 | ||
| Signal status display | With accessories | ||
| C value | 2,1 l/sbar ... 5,6 l/sbar | ||
| Switching time off | 6 ms ... 120 ms | ||
| Switching time reversal | 2 ms ... 55 ms | ||
| Permissible voltage fluctuations | +/- 10 % | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Media temperature | -20 °C ... 60 °C | ||
| Product weight | 335 g ... 685 g | ||
| Type of mounting | With through-hole | ||
| Pneumatic connection, port 1 | G1/4 1/4 NPT QS-6 QS-8 QS-10 QS-1/4 QS-5/16 QS-3/8 | ||
| Pneumatic connection, port 3 | G1/4 1/4 NPT QS-6 QS-8 QS-10 QS-1/4 QS-5/16 QS-3/8 | ||
| Pneumatic connection, port 5 | G1/4 1/4 NPT QS-6 QS-8 QS-10 QS-5/16 QS-1/4 QS-3/8 | ||
| Material seals | NBR | ||
| Material screws | High-alloy stainless steel |
