Especificaciones
Series (ADN) | Compact cylinder, double-acting |
---|---|
Design type (S) | Short |
Piston diameter [mm] (25) | 25 |
Stroke [mm] (25) | 25 |
Piston rod thread type (A) | Male thread |
---|---|
Cushioning (P) | Elastic cushioning rings/plates on both sides |
Position sensing (A) | For proximity sensor |
Special material properties (F1A) | Recommended for production facilities for the manufacture of lithium-ion batteries |
Note on materials | RoHS-compliant | ||
Ambient temperature | 0 °C ... 60 °C | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 247 N | ||
Moving mass for 0 mm stroke | 25 g | ||
Basic weight for 0 mm stroke | 88 g | ||
Type of mounting | With through-hole Via female thread | ||
Material cover | Anodised wrought aluminium alloy | ||
Material housing | Anodised wrought aluminium alloy | ||
Stroke | 25 mm | ||
Cushioning | Elastic cushioning rings/plates at both ends | ||
Mode of operation | Double-acting | ||
Design | Piston Piston rod | ||
Symbol | 00991217 | ||
Operating pressure | 8,7 psi ... 145 psi | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
LABS (PWIS) conformity | VDMA24364-B2-L |
Cleanroom class | Class 6 according to ISO 14644-1 | ||
Impact energy in end positions | 0,3 J | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 295 N | ||
Additional moving mass per 10 mm stroke | 6 g | ||
Additional weight per 10 mm stroke | 30 g | ||
Pneumatic connection | M5 | ||
Material dynamic seals | NBR TPE-U(PU) | ||
Material piston rod | High-alloy stainless steel | ||
Piston diameter | 25 mm | ||
Mounting position | optional | ||
Piston-rod end | Male thread | ||
Position detection | Via proximity switch | ||
Variants | Recommended for production facilities for manufacturing of lithium-ion batteries Piston rod at one end | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Suitability for the production of Li-ion batteries | Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils |