Stroke | 10 mm ... 400 mm | ||
Piston rod thread | M10x1.25 | ||
Cushioning | Elastic cushioning rings/plates at both ends | ||
Piston-rod end | Female thread | ||
Position detection | Via proximity switch | ||
Operating pressure | 2,5 bar ... 10 bar | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Impact energy in end positions | 0,4 J | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 483 N | ||
Type of mounting | Via female thread With accessories | ||
Note on materials | RoHS-compliant | ||
Material piston rod | High-alloy steel |
Piston diameter | 32 mm | ||
Based on standard | ISO 21287 | ||
Mounting position | optional | ||
Design | Piston Piston rod Cylinder barrel | ||
Variants | With end-position locking on both sides With end-position locking at rear With end-position locking at front Extended male piston rod thread Custom thread on the piston rod Extended piston rod Laser etched rating plate | ||
Mode of operation | Double-acting | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Ambient temperature | -20 °C ... 80 °C | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 415 N | ||
Additional moving mass per 10 mm stroke | 9 g | ||
Pneumatic connection | G1/8 | ||
Material cover | Wrought aluminium alloy Anodised | ||
Material cylinder barrel | Wrought aluminium alloy Smooth anodised |