Festo 536351 Cilindro compacto

ADN-80-40-I-P-A-S6

$370,75 1 uds. con envío de 1 a 3 días a United States

Especificaciones

Series (ADN) Compact cylinder, double-acting, based on ISO 21287
Piston diameter [mm] (80) 80
Stroke [mm] (40) 40
Piston rod thread type (I) Female thread
Cushioning (P) Elastic cushioning rings/plates on both sides
Position sensing (A) For proximity sensor
Special material properties None
Protection against rotation None
Piston rod type At one end
Custom thread None
Temperature range (S6) Heat-resistant seals max. 120 °C
Constant motion Standard
Running characteristics Standard
Improved running performance None
Corrosion protection Standard
Captive rating plate Rating plate, glued
Low temperature None
Scraper variant Standard
EU certification None
CE marking (see declaration of conformity) To UK EX instructions
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
LABS (PWIS) conformity VDMA24364-B1/B2-L VDMA24364 zone III
Cleanroom class Class 4 according to ISO 14644-1 Class 5 according to ISO 14644-1
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 2.827 N
Moving mass for 0 mm stroke 400 g
Basic weight for 0 mm stroke 1.121 g
Type of mounting With through-hole Via female thread With accessories Either:
Note on materials RoHS-compliant
Material piston rod High-alloy steel
Stroke 1 mm ... 500 mm
Based on standard ISO 21287
Mounting position optional
Position detection Via proximity switch
Operating pressure 0,6 bar ... 10 bar
CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
ATEX category gas II 2G
Explosion ignition protection type for gas Ex h IIC T4 Gb
Explosion ambient temperature -20°C <= Ta <= +60°C
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Corrosion resistance class CRC 0 - No corrosion stress 2 - Moderate corrosion stress 3 - high corrosion stress
Suitability for the production of Li-ion batteries Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils
Ambient temperature -40 °C ... 120 °C
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 2.827 N ... 3.016 N
Additional moving mass per 10 mm stroke 25 g
Additional weight per 10 mm stroke 79 g
Pneumatic connection G1/8
Material cover Die-cast aluminium, coated
Material cylinder barrel Wrought aluminium alloy Smooth anodised
Piston diameter 80 mm
Cushioning Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning
Design Piston Piston rod Profile barrel
Variants EX protection approval (ATEX) Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. Improved running performance Extended male piston rod thread Custom thread on the piston rod Extended piston rod With protection against rotation High corrosion protection Dust protection Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Laser etched rating plate Temperature range -40 to 80°C Piston rod at one end
Mode of operation Double-acting
Explosion protection Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
ATEX category dust II 2D
Explosion ignition protection type for dust Ex h IIIC T120°C Db
$370,75
Stock 1 uds.
Referencia 536351
Fabricante Festo
Unidades Precio / Unidad
1+ $370,75

  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros