Especificaciones
Series (ADNGF) | Compact cylinder, double-acting, standard hole pattern |
---|---|
Piston diameter [mm] (100) | 100 |
Stroke [mm] (400) | 400 |
Cushioning (PPS) | Pneumatic cushioning, self-adjusting at both ends |
Position sensing (A) | For proximity sensor |
---|---|
Piston rod type | At one end |
Temperature range | Standard |
Captive rating plate | Rating plate, glued |
Operating pressure | 1 bar ... 10 bar | ||
Additional weight per 10 mm stroke | 116 g | ||
Note on materials | RoHS-compliant | ||
Material seals | TPE-U(PUR) | ||
Material cylinder barrel | Wrought aluminium alloy Smooth anodised | ||
Piston diameter | 100 mm | ||
Cushioning | Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning | ||
Design | Piston Piston rod Profile barrel | ||
Variants | EX protection approval (ATEX) Through piston rod Heat-resistant seals max. 120°C Laser etched rating plate | ||
Mode of operation | Double-acting | ||
CE marking (see declaration of conformity) | To UK EX instructions | ||
ATEX category gas | II 2G | ||
Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
Impact energy in end positions | 2,5 J | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 4.712 N | ||
Additional moving mass per 10 mm stroke | 43 g |
Basic weight for 0 mm stroke | 2.673 g | ||
Pneumatic connection | G1/8 | ||
Material cover | Die-cast aluminium, coated | ||
Material piston rod | High-alloy steel | ||
Stroke | 5 mm ... 400 mm | ||
Based on standard | ISO 21287 | ||
Mounting position | optional | ||
Position detection | Via proximity switch | ||
Protection against torque/guide | Guide rod with yoke | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
ATEX category dust | II 2D | ||
Explosion ignition protection type for dust | Ex h IIIC T120°C Db | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Ambient temperature | -20 °C ... 120 °C | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 4.524 N | ||
Moving mass for 0 mm stroke | 1.089 g |