Stroke | 1 mm ... 400 mm | ||
Cushioning | Elastic cushioning rings/plates at both ends | ||
Mode of operation | Double-acting | ||
Design | Piston Piston rod | ||
Symbol | 991.218 | ||
Operating pressure | 11,6 psi ... 145 psi | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
Impact energy in end positions | 0,1 J | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 4.418 N | ||
Pneumatic connection | G1/4 | ||
Material cover | Wrought aluminium alloy | ||
Material piston rod | High-alloy steel |
Piston diameter | 100 mm | ||
Mounting position | optional | ||
Piston-rod end | Male thread | ||
Position detection | Via proximity switch | ||
Variants | Through, hollow piston rod | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Ambient temperature | -20 °C ... 80 °C | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 4.418 N | ||
Type of mounting | With through-hole With accessories Either: | ||
Material collar screws | Galvanised steel | ||
Material dynamic seals | NBR TPE-U(PU) | ||
Material cylinder barrel | Wrought aluminium alloy |