Especificaciones
Parker's piloted load control valves are designed to operate independent of downstream pressure to prevent runaway loads under dynamic conditions using a pilot signal, handling pressures up to 420 bar (6000 psi) and flows up to 350 lpm (90 gpm).
Peso | 230g |
---|
Installation Torque | 16 lb-ft, 22 Nm | ||
Pressure Range Adjustment (psi) | 1000-2500 | ||
Rated Flow (gpm) | 12 | ||
Port Thread Size (Inch) | N/A | ||
Mounting Style | Threaded Cartridge Valve | ||
Flow Rate | 12 Gal/min, 45 L/min | ||
Pilot Location | External | ||
Pressure Control Range | 1000-2500 psi, 69-172.4 bar | ||
Port Thread Size | N/A | ||
Cavity Size | C10-3 | ||
Valve Material | All parts steel. All operating parts hardened steel | ||
Maximum Kinematic Viscosity | Mineral-based or synthetic with lubricating properties at viscosities of 45-2000 SSU (6 to 420 cSt) cSt | ||
Weight | 0.5 lb, 0.23 kg |
Adjustment Type | Screw Adjustment | ||
Pilot Pressure Ratio | 7:1 | ||
Holding Pressure (psi) | 2.000 | ||
Seal Material | Nitrile | ||
Mounting Type | Threaded Cartridge Valve | ||
Maximum Inlet Pressure Rating | 5500 psi, 380 bar | ||
Holding Pressure | 2000 psi, 138 bar | ||
Pressure Control Sensitivity | 153 per turn psi, 10.5 per turn bar | ||
Leak Rate | 5 @ 80% of setting drops/min | ||
Adjustment Mechanism | Screw Adjustment | ||
Body Material | N/A | ||
Filter Efficiency Rating | ISO 4406:1999 Code 18/16/13 |
Stock | Pedir cotización |
---|---|
Referencia | CB101CS20 |
Fabricante | Parker |
Unidades | Precio / Unidad |
---|---|
1+ | $466,84 |