Note on materials | RoHS-compliant | ||
Product weight | 2.000 g | ||
Operator controls | DIP switch | ||
CE mark (see declaration of conformity) | To EU EMC Directive To EC Machinery Directive In accordance with EU RoHS Directive | ||
Certificate issuing authority | BG MFS 09031 | ||
Ambient temperature | 0 °C ... 50 °C | ||
Degree of protection | IP20 | ||
LABS (PWIS) conformity | VDMA24364-B2-L | ||
Peak current load power supply | 12 A | ||
Nominal voltage load voltage DC | 48 V | ||
Brake resistance | 17 Ohm | ||
Nominal voltage for logic power supply DC | 24 V | ||
Nominal current logic power supply | 0,2 A | ||
Max. peak current duration | 2 s | ||
Max. length of motor cable without external mains filter | 25 m | ||
Operating mode of drive unit | Micro step, >4000 steps/revolution | ||
Step adjustment | Via software | ||
Nominal current setting | Via software | ||
Parameterisation interface | RS232 (9600...115000 bits/s) | ||
Bus connection | Plugs 9-pin Sub-D | ||
Rotor position sensor | Encoder | ||
Encoder interface output, function | Setpoint specification for downstream slave drive. | ||
Encoder interface input, function | Specifies the speed of the slave drive in synchronous mode. | ||
Max. current digital logic outputs | 100 mA | ||
Working range setpoint input | ± 10 V | ||
Number of analogue monitor outputs | 1 | ||
Safety function | Safe torque off (STO) |
Type of mounting | On sub-base Screw-clamped | ||
Display | 7-segment display | ||
Approval | BIA C-Tick c UL us listed (OL) | ||
CE marking (see declaration of conformity) | To UK instructions for EMC To UK regulations for machines To UK RoHS instructions | ||
Storage temperature | -25 °C ... 70 °C | ||
Relative air humidity | 0 - 90% Non-condensing | ||
Pollution degree | 2 | ||
Nominal current, load supply | 8 A | ||
Mains filter | Integrated | ||
Max. intermediate circuit voltage DC | 58 V | ||
Pulse power, brake resistance | 0,5 kVA | ||
Permissible range for logic voltage | ± 20 % | ||
Output voltage class AC | 0 V up to input voltage | ||
Output frequency | 0 Hz ... 2.000 Hz | ||
Controller operating mode | PWM MOSFET power output stage | ||
Adjustable current reduction | Via software | ||
Protective function | I²t monitoring Temperature monitoring Current monitoring Voltage failure detection Following error monitoring | ||
Max. step frequency | 4 kHz | ||
Fieldbus link | CANopen Profibus DP | ||
Bus terminator resistor | Integrated | ||
Position sensor | Encoder | ||
Encoder interface input, features | RS422 | ||
Features of digital logic outputs | Freely configurable in some cases Not galvanically isolated | ||
Number of analogue setpoint inputs | 1 | ||
Impedance of setpoint input | 20 kOhm | ||
Working range of monitor outputs | ± 10 V | ||
Performance Level (PL) | Safe Torque Off (STO)/category 3, performance level d |