FESTO 3605478 Controlador

CMXH-ST2-C5-7-DIOP

$1.391,58 1 uds. con envío de 1 a 3 días a United States

Especificaciones

Series (CMXH) Controller
Motor type (ST) Stepper motor ST
Number of axes (2) 2 units
Nominal current (C5) 5 A
Nominal input voltage (7) 48 V DC
Bus protocol/activation (DIO) Digital I/O interface
Switching input/output (P) PNP
Diagnostic coverage 90 %
Type of mounting On H-rail via accessories Via screws in slots
Approval RCM trademark
Certificate issuing authority 01/205/5519.00/16 TÜV Rheinland
Storage temperature -25 °C ... 75 °C
Relative air humidity 0 - 90% Non-condensing
Electrical connection system I/Os Socket, sub-D, 15-pin
Number of digital logic outputs 24 V DC 5
Bus connection Plugs 9-pin Sub-D
Process interfacing For 31 sets
Permissible range for logic voltage ± 15 %
Note on digital logic inputs / outputs Alternatively, 24 V is also possible.
Current consumption of logic power supply without clamping brake 0,2 A
Brake resistance 15 Ohm
Mains filter Integrated
Permissible load current 12 A
Power failure bridging 10 ms
Status displays 7-segment display LED
Ethernet, supported protocols TCP/IP, Modbus TCP
Shock resistance test EN 60068-2-27
Total number of axes 2
Communication profile FHPP
Note on max. fieldbus transmission rate 1 Mbit/s with CANopen
Programming software FCT (Festo Configuration Tool)
Device-specific diagnostics Diagnostic memory Short circuit in motor winding Undervoltage/overvoltage System- and motor-oriented diagnostics
Parameterisation System parameter
Ethernet interface RJ45 (socket, 8-pin)
LED display, product-specific POWER: Load voltage applied
Performance Level (PL) Safe Torque Off (STO)/category 3, performance level e
Proof test interval 20 y
Certified for safety functions to ISO 13849 (PL) Product can be used in SRP/CS up to category 3, PL e
Mean time to dangerous failure (MTTFd) STO/5700 years
Hardware fault tolerance 1
Ambient temperature 0 °C ... 50 °C
Product weight 700 g
CE mark (see declaration of conformity) To EU EMC Directive To EC Machinery Directive
Degree of protection IP20
Note on materials RoHS-compliant
Fieldbus link 1x CANopen Slave
Number of digital logic inputs 8
Note on power failure buffering Digital logic inputs/outputs are only available in I/O mode.
Controller operating mode Direct operation Set selection
Nominal voltage for logic power supply DC 24 V
Nominal voltage load voltage DC 48 V
Permissible range for load power supply ± 10 %
Max. current consumption, logic power supply with clamping brake and I/O 0,9 A
Note on nominal operating voltage of load voltage supply DC Integrated braking resistor
Nominal current, load supply 10 A
Current rating per output 100 mA
Note on braking resistor The 10 ms are not complied with if a brake is integrated.
Ethernet, number 1
Vibration resistance test EN 60068-2-6
Protection class III
Control methods I/O standalone CAN bus TCP/IP
Max. fieldbus transmission rate 100 Mbit/s
Supported kinematic Planar surface gantry EXCM
Dimensions (W x L x H) 50 x 149 x 130 mm
Configuration support FCT (Festo Configuration Tool)
Protocol CANopen FHPP Modbus® TCP
LED display, bus-specific Device: operating status Com: Communication status
Safety function Safe torque off (STO)
Safety Integrity Level (SIL) Safe torque off (STO)/SIL 3
SFF Safe Failure Fraction 99 %
Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in SRP/CS up to SIL 3 (high demand)
Duration of use Tm 20 y
Features of digital logic outputs Not galvanically isolated
$1.391,58
Stock 1 uds.
Referencia 3605478
Fabricante FESTO
Unidades Precio / Unidad
1+ $1.391,58

  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros