| Dimensions (W x L x H) | 18.9 x 76.6 x 124.3 mm | ||
| Number of outputs | 4 | ||
| Diagnostics via bus | Short circuit/overload in actuator supply Short circuit/overload at analogue output Parameterisation error Nominal range exceeded Nominal range not reached Undervoltage in load supply General errors | ||
| Module parameters | Deactivate actuator supply Data format for analogue outputs Short circuit diagnostics for actuator supply Parameterisation error diagnostics Diagnostics for undervoltage in load supply Behaviour after short circuit/overload in actuator supply Behaviour after short circuit/overload at analogue output | ||
| Repetition accuracy | ±0.05% at 25°C | ||
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 60 mA | ||
| Operating error limit related to the ambient temperature range | ±0.3% | ||
| Max. residual current outputs per module | 2 A | ||
| Nominal operating voltage DC of load | 24 V | ||
| Isolation channel - internal bus | yes | ||
| Permissible voltage fluctuations for electronics/sensors | ± 25% | ||
| Power supply, connection type | 2x terminal strip | ||
| Power supply, number of pins/wires | 4 | ||
| Power supply, conductor diameter | 0,2 mm² ... 1,5 mm² | ||
| Approval | RCM trademark c UL us listed (OL) | ||
| CE mark (see declaration of conformity) | To EU EMC Directive | ||
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 | ||
| Corrosion resistance class CRC | 0 - No corrosion stress | ||
| Relative air humidity | 95 % Non-condensing | ||
| Degree of protection | IP20 | ||
| Note on ambient temperature | -5 - 60°C for vertical installation | ||
| Max. address volume, outputs | 8 Byte | ||
| Data format | 15 bits + prefix Linear scaling | ||
| Electrical connection output, function | Analogue output | ||
| Electrical connection output, connector system | Spring-loaded terminal | ||
| Electrical connection for output, conductor cross section | 0,2 mm² ... 1,5 mm² | ||
| Electrical connection for output 2, function | Functional earth | ||
| Electrical connection for output 2, connection technology | Spring-loaded terminal | ||
| Electrical connection output 2, connection pattern | 995.842 | ||
| Electrical connection output 2, note on conductor cross section | 0.2 - 2.5 mm² for flexible conductors without wire end sleeves | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant |
| Grid dimension | 18,9 mm | ||
| Diagnostics via LED | Errors per channel Errors per module | ||
| Measured variable | Voltage Current | ||
| Channel parameters | Force channel x Enable wire break/idling diagnostics Enable for parameterisation error diagnostics Enable overload/short circuit diagnostics Signal range per channel | ||
| Fuse protection (short circuit) | Internal electronic fuse per module | ||
| Intrinsic current consumption at nominal operating voltage load | Typically 15 mA | ||
| Basic error limit at 25 °C | ±0.1% | ||
| Nominal DC operating voltage, electronics/sensors | 24 V | ||
| Power failure bridging | 10 ms | ||
| Isolation channel - channel | no | ||
| Permissible voltage fluctuation of load | ± 25 % | ||
| power supply, connection system | Spring-loaded terminal | ||
| Power supply, connection pattern | 995.847 | ||
| Power supply, note on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without wire end sleeves | ||
| KC mark | KC-EMV | ||
| Certificate issuing authority | UL E239998 | ||
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 | ||
| Storage temperature | -20 °C ... 70 °C | ||
| Protection against direct and indirect contact | PELV | ||
| Ambient temperature | -5 °C ... 50 °C | ||
| Product weight | 96 g | ||
| analog input | -10 - 10 V -20 - 20 mA -5 - 5 V 0 - 10 V 0 - 20 mA 4 - 20 mA | ||
| Max. cable length | 30 m Shielded | ||
| Electrical connection output, connection type | 4x terminal strip | ||
| Electrical connection output, number of connections/cores | 4 | ||
| Electrical connection for output, note on conductor cross section | 0.2 - 2.5 mm² for flexible conductors without wire end sleeves | ||
| Electrical connection for output 2, connection type | Terminal strip | ||
| Electrical connection output 2, number of pins/wires | 4 | ||
| Electrical connection output 2, conductor cross section | 0,2 mm² ... 1,5 mm² | ||
| Type of mounting | With H-rail | ||
| Material housing | PA |
