| Diagnostic function | Display via LED | ||
| Short circuit current rating | yes | ||
| Repetition accuracy | Min. ± 0.1 mm | ||
| Power supply requirements | PELV | ||
| Nominal operating voltage DC | 24 V | ||
| Residual ripple | 4 Vpp | ||
| Permissible voltage fluctuations | +/- 25% | ||
| KC mark | KC-EMV | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
| LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
| Relative air humidity | 95 % Non-condensing | ||
| Ambient temperature | 0 °C ... 55 °C | ||
| Linearity error in ± %FS | 0,2 % | ||
| Characteristic for inputs | To EN 61131-2 | ||
| Switching logic for outputs | PNP (positive switching) | ||
| Electrical connection PLC | M12 Plugs 8-pin | ||
| Material housing | PBT-reinforced |
| Mounting position | optional | ||
| Reverse polarity protection | For PLC plug S1 | ||
| Analogue output | 0 - 10 V To EN 61131-2 | ||
| Debounce time for inputs | 3 ms | ||
| Power failure buffering for logic voltage | 10 ms | ||
| Current consumption at nominal operating voltage | 20 mA ... 30 mA | ||
| Approval | RCM trademark | ||
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
| Corrosion resistance class CRC | 1 - Low corrosion stress | ||
| Storage temperature | -20 °C ... 70 °C | ||
| Degree of protection | IP65 IP67 | ||
| Product weight | 128 g | ||
| Characteristic for outputs | To EN 61131-2 | ||
| Switching logic for inputs | PNP (positive switching) | ||
| Electrical connection measuring system | M12 Socket 8-pin | ||
| Type of mounting | With through-hole |
