Especificaciones
Series (DFM) | Guided drive, double-acting |
---|---|
Piston diameter [mm] (25) | 25 |
Stroke [mm] (50) | 50 |
Generation | Standard |
Cushioning (P) | Elastic cushioning rings/plates on both sides |
Position sensing (A) | For proximity sensor |
Guide (KF) | Recirculating ball bearing guide |
Special material properties (F1A) | Recommended for production facilities for the manufacture of lithium-ion batteries |
---|---|
Temperature range | Standard |
Precision adjustment extended | None |
Precision adjustment retracting | None |
Slot cover, sensor slot | None |
Proximity switch, with cable, 2.5 m | None |
Proximity switch, contactless, with cable, 2.5 m | None |
Operating pressure | 1,5 bar ... 10 bar | ||
Max. permissible torque load Mx as a function of stroke | 5,43 Nm | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 247 N | ||
Moving mass | 711 g | ||
Centre of gravity of moving mass as a function of stroke | 38,8 mm | ||
Pneumatic connection | G1/8 | ||
Material cover | Wrought aluminium alloy | ||
Material housing | Wrought aluminium alloy | ||
Distance from centre of gravity of load to yoke plate xs | 50 mm | ||
Piston diameter | 25 mm | ||
Cushioning | Elastic cushioning rings/plates at both ends | ||
Guide | Recirculating ball bearing guide | ||
Position detection | Via proximity switch | ||
Variants | Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. | ||
Mode of operation | Double-acting | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
Cleanroom class | Class 5 according to ISO 14644-1 | ||
Impact energy in end positions | 0,3 J | ||
Max. force Fy static | 1.060 N | ||
Max. force Fz static | 1.060 N | ||
Max. torque Mx static | 36,04 Nm | ||
Max. torque My static | 20,67 Nm |
Max. torque Mz static | 20,67 Nm | ||
Max. effective load dependent upon stroke at defined distance xs | 112 N | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 295 N | ||
Product weight | 1.524 g | ||
alternative connections | See product drawing | ||
Note on materials | RoHS-compliant | ||
Material seals | NBR | ||
Material piston rod | High-alloy stainless steel | ||
Stroke | 50 mm | ||
Operating mode, drive unit | Yoke | ||
Mounting position | optional | ||
Design | Guidance | ||
Symbol | 991.737 | ||
Max. speed | 0,8 m/s | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 0 - No corrosion stress | ||
Suitability for the production of Li-ion batteries | Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils | ||
Ambient temperature | -5 °C ... 60 °C | ||
Max. force Fy | 863 N | ||
Max. force Fz | 863 N | ||
Max. moment Mx | 29,35 Nm | ||
Max. moment My | 16,83 Nm | ||
Max. moment Mz | 16,83 Nm |