Especificaciones
Series (DFPC) | Linear drive |
---|---|
Piston diameter [mm] (125) | 125 |
Stroke [mm] (150) | 150 |
Function (D) | Double-acting |
Piston rod thread type | Male thread |
Housing surface treatment | None |
---|---|
EU certification | None |
Piston rod extension | None |
Piston rod thread extension | None |
Position detection | Via proximity switch | ||
Material cover | Gravity die-cast aluminium | ||
Material piston rod wiper | TPE-U(PU) | ||
Material static seals | NBR | ||
Material cylinder barrel | Smooth-anodised wrought aluminium alloy | ||
Flange hole pattern | F10 | ||
Piston diameter | 125 mm | ||
Cushioning | Elastic cushioning rings/plates at both ends | ||
Mode of operation | Double-acting | ||
Symbol | 991.217 | ||
Nominal operating pressure | 87 psi | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 | ||
Ambient temperature | -20 °C ... 80 °C | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 7.069 N | ||
Air consumption on return stroke per 10 mm | 0,825 l | ||
Moving mass for 0 mm stroke | 1.059,6 g | ||
Product weight | 4.580 g | ||
Additional weight per 10 mm stroke | 107,4 g | ||
Pneumatic connection | G1/8 |
Note on materials | RoHS-compliant | ||
Material piston rod | High-alloy stainless steel | ||
Material nut | High-alloy stainless steel | ||
Material tie rod | High-alloy stainless steel | ||
Size of valve actuator | 125 | ||
Stroke | 150 mm | ||
Fitting connection conforms to standard | ISO 5210 | ||
Mounting position | optional | ||
Design | Piston Piston rod Tie rod Cylinder barrel | ||
Operating pressure | 8,7 psi ... 116 psi | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 | ||
LABS (PWIS) conformity | VDMA24364 zone III | ||
Impact energy in end positions | 1,1 J | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 7.363 N | ||
Air consumption on advance stroke per 10 mm | 0,859 l | ||
Additional moving mass per 10 mm stroke | 38,9 g | ||
Basic weight for 0 mm stroke | 2.968,9 g | ||
Type of mounting | On flange as per ISO 5210 With spacer bolt Either: |