Stroke | 10 mm ... 3.000 mm | ||
Cushioning | Pneumatic cushioning, adjustable at both ends Shock absorber, hard characteristic curve | ||
Guide | Plain-bearing guide Basic guide Recirculating ball bearing guide Heavy-duty guide | ||
Position detection | Via proximity switch Via attached displacement encoder With integrated displacement encoder | ||
Operating pressure | 2 bar ... 8 bar | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) | ||
Explosion ignition protection type for gas | Ex h IIC T4 Gb X | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] | ||
Corrosion resistance class CRC | 0 - No corrosion stress 1 - Low corrosion stress 2 - Moderate corrosion stress | ||
Ambient temperature | -10 °C ... 60 °C | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 483 N | ||
alternative connections | See product drawing | ||
Material cover | Die-cast aluminium Coated | ||
Material housing | Aluminium Anodised |
Piston diameter | 32 mm | ||
Mounting position | optional | ||
Coupling design | Positive-locking (slot) | ||
Variants | Supply port at both ends Protected version Standard slide Extended slide Clamping unit at rear Clamping unit, underneath Clamping unit at front | ||
Mode of operation | Double-acting | ||
CE marking (see declaration of conformity) | To UK EX instructions | ||
ATEX category gas | II 2G | ||
Explosion ambient temperature | -10°C <= Ta <= +60°C | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Degree of protection | IP65 | ||
Cushioning length | 20 mm | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 483 N | ||
Pneumatic connection | G1/8 | ||
Material seals | NBR TPE-U(PU) |