| Material piston rod | High-alloy stainless steel | ||
| Piston diameter | 6 mm | ||
| Cushioning | Elastic cushioning rings/plates at both ends | ||
| Guide | Ball bearing cage guide | ||
| Position detection | Without | ||
| Operating pressure | 14,5 psi ... 87 psi | ||
| Mode of operation | Double-acting | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| LABS (PWIS) conformity | VDMA24364-B2-L | ||
| Max. force Fy | 20 N | ||
| Max. moment Mx | 0,3 Nm | ||
| Max. moment Mz | 0,4 Nm | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 17 N | ||
| Product weight | 52 g | ||
| Pneumatic connection | M3 | ||
| Material cover | POM | ||
| Material guide | High-alloy steel |
| Stroke | 10 mm | ||
| Operating mode, drive unit | Yoke | ||
| Mounting position | optional | ||
| Design | Scotch yoke system | ||
| Symbol | 991.263 | ||
| Repetition accuracy | 0.2 mm | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Ambient temperature | 10 °C ... 50 °C | ||
| Max. force Fz | 20 N | ||
| Max. moment My | 0,4 Nm | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 12,7 N | ||
| Moving mass | 17 g | ||
| Type of mounting | Via female thread and dowel pin | ||
| Note on materials | RoHS-compliant | ||
| Material seals | NBR | ||
| Material housing | High-alloy stainless steel |
