Especificaciones
Series (DGST) | Slide drive |
---|---|
Size [mm] (10) | 10 |
Stroke [mm] (10) | 10 |
Version | Standard |
Cushioning (P) | Elastic cushioning rings/plates on both sides |
---|---|
Position sensing (A) | For proximity sensor |
Special material properties | None |
Lubrication | Standard |
Guide | Recirculating ball bearing guide | ||
Type of mounting | With through-hole | ||
Note on materials | RoHS-compliant | ||
Material seals | HNBR | ||
Material housing | Wrought aluminium alloy | ||
Stroke | 10 mm | ||
Adjustable end position range/length rear | 10 mm | ||
Operating mode, drive unit | Yoke | ||
Mounting position | optional | ||
Position detection | Via proximity switch | ||
Operating pressure | 14,5 psi ... 116 psi | ||
Repetition accuracy | <= 0.3 mm | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 1 - Low corrosion stress | ||
Impact energy in end positions | 0,08 J | ||
Max. force Fy | 470 N | ||
Max. moment Mx | 3 Nm | ||
Max. moment Mz | 3 Nm | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 94 N |
Product weight | 270,4 g | ||
Pneumatic connection | M5 | ||
Material cover | Wrought aluminium alloy | ||
Material guide | POM TPE-E High-alloy steel | ||
Material piston rod | High-alloy stainless steel | ||
Adjustable end position range/length front | 10 mm | ||
Piston diameter | 10 mm | ||
Cushioning | Elastic cushioning rings/plates at both ends | ||
Design | Twin piston Yoke Piston rod Slide | ||
Symbol | 991.249 | ||
Max. speed | 0,8 m/s | ||
Mode of operation | Double-acting | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Ambient temperature | -10 °C ... 60 °C | ||
Cushioning length | 1,5 mm | ||
Max. force Fz | 470 N | ||
Max. moment My | 3 Nm | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 79 N | ||
Moving mass | 135,7 g |