Especificaciones
Series (DGST) | Slide drive |
---|---|
Size [mm] (6) | 6 |
Stroke [mm] (20) | 20 |
Version | Standard |
Cushioning (P1) | Elastomer cushioning, adjustable on both sides, with fi xed stop |
---|---|
Position sensing (A) | For proximity sensor |
Special material properties | None |
Lubrication | Standard |
Design | Twin piston Yoke Piston rod Slide | ||
Type of mounting | With through-hole | ||
Note on materials | RoHS-compliant | ||
Material seals | HNBR | ||
Material housing | Wrought aluminium alloy | ||
Stroke | 10 mm ... 50 mm | ||
Adjustable end position range/length rear | 8,45 mm ... 11,6 mm | ||
Operating mode, drive unit | Yoke | ||
Mounting position | optional | ||
Position detection | Via proximity switch | ||
Variants | Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. | ||
Max. speed | 0,5 m/s | ||
Mode of operation | Double-acting | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Suitability for the production of Li-ion batteries | Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils | ||
Ambient temperature | -10 °C ... 60 °C | ||
Cushioning length | 0,9 mm ... 4 mm | ||
Max. force Fz | 200 N ... 280 N | ||
Max. moment My | 0,7 Nm ... 1,2 Nm | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 25 N | ||
Moving mass | 49 g ... 93 g |
Product weight | 90 g ... 182 g | ||
Pneumatic connection | M3 | ||
Material cover | Wrought aluminium alloy | ||
Material guide | POM TPE-E High-alloy steel | ||
Material piston rod | High-alloy stainless steel | ||
Adjustable end position range/length front | 6,95 mm ... 13,1 mm | ||
Piston diameter | 6 mm | ||
Cushioning | Short elastic cushioning rings/pads at both ends Elastomer cushioning, double-sided, stroke not adjustable Elastic cushioning rings/plates at both ends Elastic cushioning rings/pads at both ends with fixed stop External hydraulic cushioning | ||
Guide | Recirculating ball bearing guide | ||
Symbol | 00991249 | ||
Operating pressure | 21,75 psi ... 116 psi | ||
Repetition accuracy | <= 0.3 mm <= 0.02 mm | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 1 - Low corrosion stress | ||
Cleanroom class | Class 7 according to ISO 14644-1 | ||
Impact energy in end positions | 0,005 J ... 0,1 J | ||
Max. force Fy | 200 N ... 280 N | ||
Max. moment Mx | 1,1 Nm ... 1,4 Nm | ||
Max. moment Mz | 0,7 Nm ... 1,2 Nm | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 34 N |