Especificaciones
Series (DHPC) | Parallel gripper |
---|---|
Gripper characteristic (L) | Long stroke |
Size (25) | 25 |
Position sensing (A) | For proximity sensor |
Gripping force backup (NC) | N/O contact |
---|---|
Pneumatic connection (S) | On the side |
Dust protection | None |
Type of mounting gripper fi nger | None |
Gripper function | Parallel | ||
Type of mounting | Direct mounting via through-hole Direct mounting via thread On mounting frame Via through-hole and dowel pin Via female thread and dowel pin Either: | ||
Note on materials | RoHS-compliant | ||
Material gripper jaws | High-alloy stainless steel | ||
Stroke per gripper jaws | 11 mm | ||
Max. angular gripper jaw backlash ax, ay | 0 deg | ||
Rotationally symmetrical | ≤ 0,2 mm | ||
Number of gripper jaws | 2 | ||
Mode of operation | Single-acting Closed | ||
Guide | Ball guide | ||
Symbol | 997.348 | ||
Operating pressure | 36,25 psi ... 116 psi | ||
Min. opening time at 0.6 MPa (6 bar, 87 psi) | 176 ms | ||
Max. mass per external gripper finger | 550 g | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
LABS (PWIS) conformity | VDMA24364-B2-L | ||
Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) | 145,7 N | ||
Max. force on gripper jaw Fz static | 127,5 N | ||
Max. torque at gripper My static | 1,94 Nm |
Product weight | 495 g | ||
Pneumatic connection | M5 | ||
Material housing | Anodised aluminium | ||
Size | 25 | ||
Max. replacement accuracy | 0,2 mm | ||
Max. gripper jaw backlash Sz | 0 mm | ||
Repetition accuracy, gripper | ≤ 0,02 mm | ||
Mounting position | optional | ||
Design | Connection direction at side Lever Standard mounting method for gripper fingers Force pilot operated motion sequence | ||
Position detection | Via proximity switch | ||
Total gripper force, opening, 0.6 MPa (6 bar, 87 psi) | 291,4 N | ||
Max. operating frequency of gripper | 3 Hz | ||
Min. closing time at 0.6 MPa (6 bar, 87 psi) | 83 ms | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 0 - No corrosion stress | ||
Ambient temperature | -10 °C ... 60 °C | ||
Mass moment of inertia | 2,18 kgcm² | ||
Max. torque at gripper Mx static | 0,97 Nm | ||
Max. torque at gripper Mz static | 0,97 Nm |