| Material housing | Painted die cast aluminium | ||
| Note on materials | RoHS-compliant | ||
| Material seals | TPE-U(PU) | ||
| Cushioning angle | 0,5 deg | ||
| Cushioning | Elastic cushioning rings/plates at both ends | ||
| Mode of operation | Double-acting | ||
| Position detection | Via proximity switch | ||
| Variants | Spigot shaft | ||
| Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) | 3 Hz | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| LABS (PWIS) conformity | VDMA24364-B2-L | ||
| Cleanroom class | Class 6 according to ISO 14644-1 | ||
| Max. axial force | 75 N | ||
| Theoretical torque at 0.6 MPa (6 bar, 87 psi) | 10 Nm | ||
| Product weight | 912 g |
| Pneumatic connection | G1/8 | ||
| Material drive shaft | Nickel-plated steel | ||
| Size | 32 | ||
| Swivel angle | 0 deg ... 180 deg | ||
| Mounting position | optional | ||
| Design | Vane | ||
| Symbol | 991.265 | ||
| Operating pressure | 2 bar ... 8 bar | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Corrosion resistance class CRC | 1 - Low corrosion stress | ||
| Suitability for the production of Li-ion batteries | Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils | ||
| Ambient temperature | 0 °C ... 60 °C | ||
| Max. radial force | 200 N | ||
| Permissible mass moment of inertia | 0,02 kgm² | ||
| Type of mounting | Via female thread |
