Stroke | 1 mm ... 2.800 mm | ||
Piston rod thread | M12 M20x1.5 | ||
Based on standard | ISO 15552 | ||
Mounting position | optional | ||
Piston-rod end | Male thread Female thread | ||
Position detection | Via proximity switch | ||
Variants | For unlubricated operation Clamping unit attached End-position locking at both ends End-position locking with piston rod in retracted position End-position locking with piston rod in advanced position Increased chemical resistance Bellows on bearing cap Hard scraper Extended male piston rod thread Piston rod with female thread Extended piston rod Low friction for balancer applications Metal scraper With protection against rotation Uniform, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Sensor slots on 3 profile sides Temperature range 0 to 150°C Temperature range -40 to 80°C Piston rod at one end | ||
Static holding force of clamping unit | 5.000 N | ||
Clamping unit release pressure | 3 bar | ||
Static holding force of end-position locking | 5.000 N | ||
Unlocking pressure | ≥ 1,5 bar | ||
Operating pressure | 0,05 bar ... 12 bar | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
ATEX category dust | II 2D | ||
Explosion ignition protection type for dust | Ex h IIIC T120°C Db | ||
Explosion protection certification outside the EU | EPL Db (GB) EPL Gb (GB) | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Ambient temperature | -40 °C ... 150 °C | ||
Cushioning length | 0 mm ... 31 mm | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 2.721 N | ||
Moving mass for 0 mm stroke | 667 g ... 1.682 g | ||
Basic weight for 0 mm stroke | 2.570 g ... 5.769 g | ||
Additional weight per piston rod extension of 10 mm | 39 g | ||
Type of mounting | Via female thread With accessories Either: | ||
Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
Material spring | Spring steel High-alloy stainless steel | ||
Material housing end-position locking | Anodised wrought aluminium alloy | ||
Material clamping jaws clamping unit | Brass | ||
Material piston end-position locking | Hardened steel | ||
Material piston rod | High-alloy stainless steel, hard chrome-plated High-alloy steel High-alloy stainless steel | ||
Buffer seal material | FPM TPE-U(PU) | ||
Material cylinder barrel | Smooth-anodised wrought aluminium alloy | ||
Material rod wiper | Brass PTFE reinforced | ||
Material collar screws | Galvanised steel |
Piston diameter | 80 mm | ||
Torsional backlash at piston rod +/- | -0,45 deg ... 0,45 deg | ||
Cushioning | Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends | ||
Conforms to standard | ISO 15552 | ||
Design | Piston Piston rod Profile barrel | ||
Symbol | 00991217 00991218 00991235 00991237 00991257 00991258 00991907 00991910 00992970 00992971 | ||
Mode of operation clamping unit | Retracting Advancing Static Released through compressed air Frictional clamping with spring force | ||
Axial backlash clamping unit | 0,8 mm | ||
Mode of operation end-position locking | Positive interlocking with stop cylinder Released through compressed air | ||
Axial backlash end-position locking | 1,5 mm | ||
Locking pressure | ≤ 0,5 bar | ||
Mode of operation | Double-acting | ||
CE marking (see declaration of conformity) | To UK EX instructions | ||
ATEX category gas | II 2G | ||
Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress 3 - high corrosion stress | ||
Impact energy in end positions | 0,9 J ... 1,8 J | ||
Max. torque for protection against torsion | 3 Nm | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 2.721 N ... 3.016 N | ||
Additional moving mass per 10 mm stroke | 32 g ... 78 g | ||
Additional weight per 10 mm stroke | 85 g ... 180 g | ||
Additional weight per piston rod thread extension of 10 mm | 22 g | ||
Pneumatic connection | G3/8 | ||
Material cover | Die-cast aluminium, coated | ||
Clamping unit housing material | Anodised wrought aluminium alloy | ||
Material piston seal | FPM HNBR TPE-U(PU) | ||
Piston clamping unit material | POM | ||
Material piston | Wrought aluminium alloy | ||
Material piston rod wiper | FPM HNBR PE TPE-U(PU) | ||
Cushioning piston material | Aluminium POM | ||
Material nut | Galvanised steel | ||
Material bearing | Bronze Metal polymer compound POM | ||
Material bellows | NBR PA |
Stock | 36 uds. |
---|---|
Referencia | 753092 |
Fabricante | Festo |
Unidades | Precio / Unidad |
---|---|
1 - 4 | $229,56 |
5 - 9 | $224,96 |
10 - 14 | $220,38 |
15+ | $215,78 |