Conforms to standard | CETOP RP 52 P ISO 6432 | ||
Piston diameter | 25 mm | ||
Mounting position | optional | ||
Position detection | Via proximity switch | ||
Protection against torque/guide | Square piston rod | ||
Mode of operation | Double-acting | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
ATEX category dust | II 2D | ||
Explosion ignition protection type for dust | Ex h IIIC T120°C Db | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress 3 - high corrosion stress | ||
Impact energy in end positions | 0,3 J | ||
Type of mounting | With accessories | ||
Note on materials | RoHS-compliant | ||
Material seals | NBR TPE-U(PU) | ||
Material cylinder barrel | High-alloy stainless steel |
Stroke | 1 mm ... 500 mm | ||
Cushioning | Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends | ||
Design | Piston Piston rod Cylinder barrel | ||
Variants | Increased chemical resistance Extended male piston rod thread Piston rod with female thread Custom thread on the piston rod Piston rod with male thread shortened at one end Extended piston rod Clamping unit on the piston rod Axial supply port With direct mounting Lateral supply port With protection against rotation High corrosion protection Uniform, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Piston rod at one end | ||
Operating pressure | 1 bar ... 10 bar | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
ATEX category gas | II 2G | ||
Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Ambient temperature | -20 °C ... 120 °C | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 247 N ... 295 N | ||
Pneumatic connection | G1/8 | ||
Material cover | Wrought aluminium alloy | ||
Material piston rod | High-alloy stainless steel |