Festo 193993 Cilindro normalizado

DSNU-40-320-KP-P-A

$680,08 1 uds. con envío de 1 a 3 días a United States

Especificaciones

Series (DSNU) Round cylinder, double-acting, based on ISO 6432
Piston diameter [mm] (40) 40
Stroke [mm] (320) 320
Clamping unit (KP) attached
Cushioning (P) Elastic cushioning rings/plates on both sides
Position sensing (A) For proximity sensor
Special material properties None
Cylinder end cap Standard
Protection against rotation None
Piston rod type At one end
Piston rod thread extension None
K6 - Shortened male piston rod thread None
Piston rod thread type Male thread
Custom thread None
Piston rod extension None
Temperature range Standard
Constant motion Standard
Corrosion protection Standard
Scraper variant Standard
EU certification None
ATEX category dust II 2D
Piston diameter 40 mm
Mounting position optional
Position detection Via proximity switch
Protection against torque/guide Square piston rod
Mode of operation Double-acting
Explosion protection Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
Explosion ignition protection type for gas Ex h IIC T4 Gb
Explosion ambient temperature -20°C <= Ta <= +60°C
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Ambient temperature -20 °C ... 120 °C
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 633 N
Moving mass for 0 mm stroke 230 g
Basic weight for 0 mm stroke 661 g
Type of mounting With accessories
Note on materials RoHS-compliant
Material seals NBR TPE-U(PU)
Material cylinder barrel High-alloy stainless steel
Stroke 1 mm ... 500 mm
Cushioning Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends
Design Piston Piston rod Cylinder barrel
Variants Extended male piston rod thread Piston rod with female thread Custom thread on the piston rod Piston rod with male thread shortened at one end Extended piston rod Clamping unit on the piston rod Axial supply port With direct mounting Lateral supply port Metal scraper With protection against rotation High corrosion protection Dust protection Uniform, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Piston rod at one end
Operating pressure 1 bar ... 10 bar
CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
ATEX category gas II 2G
Explosion ignition protection type for dust Ex h IIIC T120°C Db
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Corrosion resistance class CRC 2 - Moderate corrosion stress 3 - high corrosion stress
Cushioning length 18 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 753 N
Additional moving mass per 10 mm stroke 16 g
Additional weight per 10 mm stroke 24 g
Pneumatic connection G1/4
Material cover Wrought aluminium alloy
Material piston rod High-alloy stainless steel
$680,08
Stock 1 uds.
Referencia 193993
Fabricante Festo
Unidades Precio / Unidad
1+ $680,08

  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros