| Feed constant | 90 mm/U | ||
| Material end cap | Anodised wrought aluminium alloy | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Material guide slide | Steel | ||
| Material pulleys | High-alloy stainless steel | ||
| Material toothed belt clamping piece | Stainless steel casting | ||
| Working stroke | 50 mm ... 8.500 mm | ||
| Toothed-belt stretch | 0,24 % | ||
| Mounting position | optional | ||
| Design | Electromechanical linear axis With toothed belt | ||
| Max. acceleration | 50 m/s² | ||
| Repetition accuracy | ±0.08 mm | ||
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
| Explosion protection certification outside the EU | EPL Db (GB) EPL Gb (GB) | ||
| ATEX category gas | II 2G | ||
| Explosion ambient temperature | -10°C <= Ta <= +60°C | ||
| Ambient temperature | -10 °C ... 60 °C | ||
| 2nd moment of area Iy | 1.160.000 mm⁴ | ||
| Max. force Fz | 3.050 N | ||
| Max. moment Mx | 36 Nm | ||
| Torsional mass moment of inertia It | 551.000 mm⁴ | ||
| Mass moment of inertia JL per kg of working load | 2,05 kgcm² |
| Pneumatic connection, clamping unit | M5 | ||
| Material profile | Anodised wrought aluminium alloy | ||
| Material drive cover | Anodised wrought aluminium alloy | ||
| Material guide rail | Steel | ||
| Material slide | Anodised wrought aluminium alloy | ||
| Effective diameter of drive pinion | 28,65 mm | ||
| Size | 80 | ||
| Toothed-belt pitch | 3 mm | ||
| Guide | Recirculating ball bearing guide | ||
| Type of motor | Stepper motor Servo motor | ||
| Max. speed | 5 m/s | ||
| Duty cycle | 100% | ||
| CE marking (see declaration of conformity) | To UK EX instructions | ||
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) | ||
| Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
| Degree of protection | IP40 | ||
| 2nd moment of area Ix | 844.000 mm⁴ | ||
| Max. force Fy | 3.050 N | ||
| Max. idle running transfer resistance | 28 N | ||
| Max. feed force Fx | 350 N | ||
| Mass moment of inertia JH per metre of stroke | 0,19 kgcm² | ||
| Material toothed belt | Polychloroprene with glass filament and nylon coating Polyurethane with steel cord and nylon cover |
