0

8083932 Festo

Festo 8083932 Unidad de eje de accionamiento por correa dentada

ELGE-TB-35-200-0H-ST-M-H1-PLK-AA-AT-FR

$1.421,60 Stock Limitado solo disponible bajo consulta

Especificaciones

Series (ELGE) Gantry axis
Drive system (TB) Toothed belt
Guide Recirculating ball bearing guide
Size (35) 35
Stroke [mm] (200) 200
Stroke reserve (0H) None
Motor type (ST) Stepper motor ST
Controller (M) Integrated
Control panel (H1) Integrated
Bus protocol/activation (PLK) PNP and IO-Link®
End-position sensing (AA) With integrated end-position sensing
Cable outlet direction (AT) Top
Motor position (FR) Front right
Profile mounting None
Proximity sensor, inductive, slot 8, N/O contact, cable 7.5 m Without
Proximity sensor, inductive, slot 8, N/C contact, cable 7.5 m Without
Slot nut for mounting slot Without
Electrical accessories None
Max. current digital logic outputs 100 mA
IO-Link, Service data IN 32-bit force 32-bit position 32-bit speed
IO-Link, Data storage required 500 Byte
Switching logic for outputs PNP (positive switching)
IO-Link, connection technology Plugs
Logic interface, connection technology M12x1, A-coded according to EN 61076-2-101
Logic interface, plug pattern 00992264
Note on materials RoHS-compliant
Material pulleys High-alloy stainless steel
Material toothed belt clamping piece Beryllium bronze
Effective diameter of drive pinion 18,46 mm
Size 35
Toothed-belt pitch 2 mm
Guide Recirculating ball bearing guide
Type of motor Stepper motor
Position detection Motor encoder Via proximity switch
Rotor position sensor Absolute single-turn encoder
Temperature monitoring Switch-off for excessive temperature Integrated precise CMOS temperature sensor with analogue output
Display LED
Max. acceleration 8,5 m/s²
Repetition accuracy ±0.1 mm
Duty cycle 100%
Max. current consumption 5.300 mA
Nominal current 5,3 A
Rotor position transducer resolution 16 bit
Power supply, connection type Plugs
Power supply, number of pins/wires 4
Approval RCM trademark
CE mark (see declaration of conformity) To EU EMC Directive In accordance with EU RoHS Directive
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
LABS (PWIS) conformity VDMA24364 zone III
Relative air humidity 0 - 90%
Protection class III
Note on ambient temperature Power must be reduced by 2% per K at ambient temperatures above 30°C.
2nd moment of area Iz 4.190 mm⁴
Max. force Fz 50 N
Reference value effective load, horizontal 2,8 kg
Reference value operational performance 5.000 km
Product weight 2.990 g
Number of digital logic inputs 2
Working range of logic input 24 V
Features of logic input Configurable Not galvanically isolated
IO-Link, communication mode COM3 (230.4 kBaud)
IO-Link, Number of ports Device 1
IO-Link, Process data content OUT 1-bit (move in) 1-bit (move out) 1-bit (quit error)
IO-Link, Process data content IN 1-bit (state device) 1-bit (state move) 1-bit (state in) 1-bit (state out)
IO-Link, Min. cycle time 1 ms
Max. cable length 15 m outputs 15 m inputs 20 m with IO-Link® operation
Switching logic for inputs PNP (positive switching)
Logic interface, connection type Plug
Logic interface, number of pins/wires 8
Material profile Anodised wrought aluminium alloy
Material drive cover Anodised wrought aluminium alloy
Material slide Anodised wrought aluminium alloy
Material toothed belt Polychloroprene with glass filament and nylon coating
Working stroke 200 mm
Toothed-belt stretch 0,094 %
Mounting position Horizontal
Design Electromechanical linear axis With toothed belt With integrated drive
Symbol 00997293
Referencing Positive fixed stop block Negative fixed stop block
Rotor position sensor, encoder measuring principle Magnetic
Additional functions User interface Integrated end-position sensing
Ready status indication LED
Max. speed 1,08 m/s
Features of digital logic outputs Configurable Not galvanically isolated
Insulation protection class B
Nominal voltage DC 24 V
Parameterisation interface IO-Link User interface
Permissible voltage fluctuations +/- 15%
power supply, connection system M12x1, T-coded according to EN 61076-2-111
Power supply, connection pattern 00995989
KC mark KC-EMV
CE marking (see declaration of conformity) To UK instructions for EMC To UK RoHS instructions
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Storage temperature -20 °C ... 60 °C
Degree of protection IP20
Ambient temperature 0 °C ... 50 °C
2nd moment of area Iy 3.770 mm⁴
Max. force Fy 50 N
Max. feed force Fx 50 N
Feed constant 58 mm/U
Additional moving mass per 10 mm stroke 0,31 g
Number of digital logic outputs 24 V DC 2
Specification logic input Based on IEC 61131-2, type 1
IO-Link, SIO-Mode support Yes
IO-Link, Protocol version Device V 1.1
IO-Link, Port class A
IO-Link, Process data length OUT 2 bytes
IO-Link, Process data length IN 2 bytes

Productos relacionados

8083931
Festo
$1.410,23
8083934
Festo
$1.444,36
8083935
Festo
$1.455,72
8083936
Festo
$1.467,12
8083933
Festo
$1.432,98
8083665
Festo
$1.604,77
8083570
Festo
$1.481,33
8083573
Festo
$1.597,03
8083576
Festo
$1.770,59
8083671
Festo
$1.689,04
8083666
Festo
$1.630,97
8083575
Festo
$1.712,74
8083425
Festo
$1.831,21
8083667
Festo
$1.683,40
8083571
Festo
$1.510,25
8083384
Festo
$1.727,90
$1.421,60
Stock Pedir cotización
Referencia 8083932
Fabricante Festo
Unidades Precio / Unidad
1+ $1.421,60

Explora la serie Festo ELGE
  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros