0

8083576 Festo

Festo 8083576 Unidad de eje de accionamiento por correa dentada

ELGS-TB-KF-60-1200-ST-M-H1-PLK-AA

$1.770,59 Stock Limitado solo disponible bajo consulta

Especificaciones

Series (ELGS) Gantry axis
Drive system (TB) Toothed belt
Guide (KF) Recirculating ball bearing guide
Size (60) 60
Stroke [mm] (1200) 1.200
Motor type (ST) Stepper motor ST
Controller (M) Integrated
Control panel (H1) Integrated
Bus protocol/activation (PLK) PNP and IO-Link®
End-position sensing (AA) With integrated end-position sensing
Cable outlet direction Standard
Electrical accessories None
Logic interface, number of pins/wires 8
Material end cap Painted die cast aluminium
Note on materials RoHS-compliant
Material drive cover Painted die cast aluminium
Material guide rail Tempered steel
Material slide Die-cast aluminium
Effective diameter of drive pinion 24,83 mm
Size 60
Toothed-belt stretch 0,124 %
Mounting position Horizontal
Design Electromechanical linear axis With toothed belt With integrated drive
Symbol 997.293
Referencing Positive fixed stop block Negative fixed stop block
Rotor position sensor, encoder measuring principle Magnetic
Additional functions User interface Integrated end-position sensing
Ready status indication LED
Max. speed 1,3 m/s
Features of digital logic outputs Configurable Not galvanically isolated
Insulation protection class B
Max. current consumption 5.300 mA
Nominal current 5,3 A
Rotor position transducer resolution 16 bit
Power supply, connection type Plugs
Power supply, number of pins/wires 4
Approval RCM trademark
CE mark (see declaration of conformity) To EU EMC Directive In accordance with EU RoHS Directive
Vibration resistance Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
LABS (PWIS) conformity VDMA24364 zone III
Relative air humidity 0 - 90%
Protection class III
Note on ambient temperature Power must be reduced by 2% per K at ambient temperatures above 30°C.
2nd moment of area Iz 542.000 mm⁴
Max. force Fz 1.800 N
Max. moment My 31,8 Nm
Max. feed force Fx 65 N
Torsional mass moment of inertia It 29.800 mm⁴
Moving mass 482 g
Weight of slide 139 g
Number of digital logic outputs 24 V DC 2
Specification logic input Based on IEC 61131-2, type 1
IO-Link, SIO-Mode support Yes
IO-Link, Protocol version Device V 1.1
IO-Link, Port class A
IO-Link, Process data length OUT 2 bytes
IO-Link, Process data length IN 2 bytes
IO-Link, Service data IN 32-bit force 32-bit position 32-bit speed
IO-Link, Data storage required 500 Byte
Switching logic for outputs PNP (positive switching)
IO-Link, connection technology Plugs
Logic interface, connection technology M12x1, A-coded according to EN 61076-2-101
Logic interface, plug pattern 992.264
Material profile Anodised wrought aluminium alloy
Material cover tape Stainless steel strip
Material guide slide Tempered steel
Material pulleys High-alloy stainless steel
Material toothed belt Polychloroprene with glass fibre
Working stroke 1.200 mm
Stroke reserve 0 mm
Toothed-belt pitch 3 mm
Guide Recirculating ball bearing guide
Type of motor Stepper motor
Position detection Motor encoder Via proximity switch
Rotor position sensor Absolute single-turn encoder
Temperature monitoring Switch-off for excessive temperature Integrated precise CMOS temperature sensor with analogue output
Display LED
Max. acceleration 6 m/s²
Repetition accuracy ±0.1 mm
Duty cycle 100%
Max. current digital logic outputs 100 mA
Nominal voltage DC 24 V
Parameterisation interface IO-Link User interface
Permissible voltage fluctuations +/- 15%
power supply, connection system M12x1, T-coded according to EN 61076-2-111
Power supply, connection pattern 995.989
KC mark KC-EMV
CE marking (see declaration of conformity) To UK instructions for EMC To UK RoHS instructions
Shock resistance Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27
Storage temperature -20 °C ... 60 °C
Degree of protection IP40
Ambient temperature 0 °C ... 50 °C
2nd moment of area Iy 441.000 mm⁴
Max. force Fy 600 N
Max. moment Mx 29,1 Nm
Max. moment Mz 31,8 Nm
Reference value effective load, horizontal 4 kg
Feed constant 78 mm/U
Moving mass for 0 mm stroke 482 g
Product weight 8.115 g
Number of digital logic inputs 2
Working range of logic input 24 V
Features of logic input Configurable Not galvanically isolated
IO-Link, communication mode COM3 (230.4 kBaud)
IO-Link, Number of ports 1
IO-Link, Process data content OUT 1-bit (move in) 1-bit (move out) 1-bit (quit error)
IO-Link, Process data content IN 1-bit (state device) 1-bit (state move) 1-bit (state in) 1-bit (state out)
IO-Link, Min. cycle time 1 ms
Max. cable length 15 m outputs 15 m inputs 20 m with IO-Link® operation
Switching logic for inputs PNP (positive switching)
Logic interface, connection type Plug

Productos relacionados

8083575
Festo
$1.712,74
8083671
Festo
$1.689,04
8083573
Festo
$1.597,03
8083571
Festo
$1.510,25
8083579
Festo
$2.002
8083572
Festo
$1.568,12
8083578
Festo
$1.944,13
8083577
Festo
$1.857,34
8083570
Festo
$1.637,26
8083574
Festo
$1.654,88
8083666
Festo
$1.475,64
8083665
Festo
$1.604,77
8083383
Festo
$1.689,04
8083389
Festo
$2.167,63
8083384
Festo
$1.727,90
8083667
Festo
$1.683,40
$1.770,59
Stock Pedir cotización
Referencia 8083576
Fabricante Festo
Unidades Precio / Unidad
1+ $1.770,59

Explora la serie Festo ELGS
  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros