Especificaciones
Series (EMMB) | Motor |
---|---|
Motor type (AS) | AC synchronous |
Flange size, motors (60) | 60 |
Performance class (02) | 200 W |
Output shaft (K) | Shaft to DIN 6885 |
Electrical connection (S) | Straight plug |
---|---|
Cable length [cm] (30) | 30 cm |
Measuring unit (S) | Absolute encoder, single turn |
Brake | None |
rotor position sensor, absolute detectable revolutions | 1 | ||
rotor position sensor, manufacturer designation | SAR-ML50AJC00 | ||
Rotor position sensor, encoder measuring principle | Optical | ||
rotor position sensor, DC operating voltage range | 4,75 V ... 5,25 V | ||
Rotor position transducer resolution | 20 bit | ||
Ambient temperature | -15 °C ... 40 °C | ||
Max. installation height | 4.000 m | ||
Storage temperature | -20 °C ... 55 °C | ||
Conforms to standard | IEC 60034 | ||
Max. winding temperature | 155 °C | ||
Temperature monitoring | Digital motor temperature transmission via Nikon A format | ||
Mounting position | optional | ||
Note on degree of protection | IP40 for motor shaft without rotary shaft seal IP54 for motor shaft with rotary shaft seal IP65 for motor housing without connection technology | ||
Balance quality | G 2.5 | ||
Featherkey shaft type | DIN 6885 A 5 x 5 x 16 | ||
Electrical connection 1, connector system | Connection pattern RE | ||
Electrical connection 1, connection pattern | 995.792 | ||
Note on materials | RoHS-compliant | ||
LABS (PWIS) conformity | VDMA24364 zone III | ||
Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
CE mark (see declaration of conformity) | To EU EMC Directive To EU Low Voltage Directive In accordance with EU RoHS Directive | ||
Certificate issuing authority | UL E342973 | ||
Nominal voltage DC | 300 V | ||
Number of pole pairs | 3 | ||
Nominal torque | 0,64 Nm | ||
Nominal rotary speed | 3.000 rpm | ||
Max. mechanical speed | 10.000 rpm | ||
Continuous stall current | 1,5 A | ||
Peak current | 4,2 A | ||
Voltage constant, phase-to-phase | 29 mVmin | ||
Phase-phase winding inductance | 20,9 mH | ||
Measuring flange | 255 x 255 x 8 mm, aluminium | ||
Product weight | 1.100 g | ||
Permissible radial shaft load | 180 N |
Rotor position sensor | Absolute single-turn encoder | ||
Rotor position encoder interface | Nikon A-format | ||
rotor position sensor, DC operating voltage | 5 V | ||
rotor position sensor, position values per revolution | 1.048.576 | ||
rotor position sensor, system accuracy of angle measurement | -120 arcsec ... 120 arcsec | ||
Note on ambient temperature | Up to 60°C with derating of -1.5% per degree Celsius | ||
Note on max. installation height | As of 1,000 m: only with derating of -1.0% per 100 m | ||
Relative air humidity | 0 - 90% | ||
Temperature class as per EN 60034-1 | F | ||
Rating class as per EN 60034-1 | S1 | ||
Motor type to EN 60034-7 | IM B5 IM V1 IM V3 | ||
Degree of protection | IP65 | ||
Concentricity, coaxiality, axial runout to DIN SPEC 42955 | N | ||
Storage lifetime under nominal conditions | 20.000 h | ||
Electrical connection 1, connection type | Plugs | ||
Electrical connection 1, number of connections/cores | 6 | ||
Pollution degree | 2 | ||
Corrosion resistance class CRC | 0 - No corrosion stress | ||
Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 | ||
Approval | c UL us - Recognized (OL) | ||
CE marking (see declaration of conformity) | To UK instructions for EMC To UK regulations for electrical equipment To UK RoHS instructions | ||
Nominal operating voltage DC | 300 V | ||
Type of winding switch | Star inside | ||
Standstill torque | 0,7 Nm | ||
Peak torque | 1,92 Nm | ||
Max. rotational speed | 6.000 rpm | ||
Nominal power rating of motor | 200 W | ||
Nominal motor current | 1,4 A | ||
Motor constant | 0,48 Nm/A | ||
Phase-phase winding resistance | 11,2 Ohm | ||
Electric time constant | 1,87 ms | ||
Total mass moment of inertia of output | 0,214 kgcm² | ||
Permissible axial shaft load | 90 N |