0

8102165 Festo

Festo 8102165 Unidad de cilindro eléctrico

EPCE-TB-60-50-FL-MF-ST-M-H1-PLK-AA

$965,80 1 uds. con envío de 1 a 3 días a United States

Especificaciones

Series (EPCE) Toothed belt
Drive system (TB) Toothed belt
Size (60) 60
Stroke [mm] (50) 50
Piston rod, front left (FL) Piston rod with male thread
Piston rod, rear left None
Piston rod, front right None
Piston rod, rear right None
Cover variant (MF) Multimount, front
Motor type (ST) Stepper motor ST
Controller (M) Integrated
Control panel (H1) Integrated
Bus protocol/activation (PLK) PNP and IO-Link®
End-position sensing (AA) With integrated end-position sensing
Cable outlet direction Standard
Electrical accessories None
Max. current digital logic outputs 100 mA
Max. cable length 15 m outputs 15 m inputs 20 m with IO-Link® operation
Switching logic for inputs PNP (positive switching)
Logic interface, connection type Plug
Logic interface, number of pins/wires 8
Type of mounting With through-hole Via female thread Via centring sleeve With accessories
Material cover Anodised wrought aluminium alloy
Material piston rod High-alloy stainless steel
Effective diameter of drive pinion 10,18 mm
Stroke 50 mm
Piston rod thread M10x1.25
Toothed-belt pitch 2 mm
Piston-rod end Male thread
Position detection Motor encoder
Symbol 00997342
Referencing Positive fixed stop block Negative fixed stop block
Rotor position sensor, encoder measuring principle Magnetic
Display LED
Max. acceleration 9 m/s²
Repetition accuracy ±0.05 mm
Duty cycle 100%
Max. current consumption 5.300 mA
Nominal current 5,3 A
Rotor position transducer resolution 16 bit
Power supply, connection type Plugs
Power supply, number of pins/wires 4
Approval RCM trademark
CE mark (see declaration of conformity) To EU EMC Directive In accordance with EU RoHS Directive
Vibration resistance Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Corrosion resistance class CRC 0 - No corrosion stress
Storage temperature -20 °C ... 60 °C
Degree of protection IP40
Ambient temperature 0 °C ... 50 °C
Impact energy in end positions 0,016 J
Max. moment My 1 Nm
Max. feed force Fx 150 N
Reference value effective load, vertical 5 kg
Reference value operational performance 500 km
Moving mass 246 g
Additional moving mass per 10 mm stroke 9,75 g
Basic weight for 0 mm stroke 1.407 g
Number of digital logic outputs 24 V DC 2
Specification logic input Based on IEC 61131-2, type 1
Features of logic input Configurable Not galvanically isolated
IO-Link, Protocol version Device V 1.1
IO-Link, Port class A
IO-Link, Process data length OUT 2 bytes
IO-Link, Process data length IN 2 bytes
IO-Link, Service data IN 32-bit force 32-bit position 32-bit speed
IO-Link, Data storage required 500 Byte
Switching logic for outputs PNP (positive switching)
IO-Link, connection technology Plugs
Logic interface, connection technology M12x1, A-coded according to EN 61076-2-101
Logic interface, plug pattern 00992264
Note on materials RoHS-compliant
Material housing Anodised wrought aluminium alloy
Material toothed belt Polychloroprene with glass fibre
Size 60
Stroke reserve 0 mm
Toothed-belt stretch 0,375 %
Mounting position optional
Type of motor Stepper motor
Design Electric cylinder With toothed belt With integrated drive
Protection against torque/guide With plain-bearing guide
Rotor position sensor Absolute single-turn encoder
Additional functions User interface Integrated end-position sensing
Ready status indication LED
Max. speed 0,6 m/s
Features of digital logic outputs Configurable Not galvanically isolated
Insulation protection class B
Nominal voltage DC 24 V
Parameterisation interface IO-Link User interface
Permissible voltage fluctuations +/- 15%
power supply, connection system M12x1, T-coded according to EN 61076-2-111
Power supply, connection pattern 00995989
KC mark KC-EMV
CE marking (see declaration of conformity) To UK instructions for EMC To UK RoHS instructions
Shock resistance Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27
LABS (PWIS) conformity VDMA24364 zone III
Relative air humidity 0 - 90%
Protection class III
Note on ambient temperature Power must be reduced by 2% per K at ambient temperatures above 30°C.
Max. moment Mx 0 Nm
Max. moment Mz 1 Nm
Reference value effective load, horizontal 10 kg
Feed constant 32 mm/U
Maintenance interval Life-time lubrication
Moving mass for 0 mm stroke 197 g
Product weight 1.637 g
Additional weight per 10 mm stroke 46 g
Number of digital logic inputs 2
Working range of logic input 24 V
IO-Link, SIO-Mode support Yes
IO-Link, communication mode COM3 (230.4 kBaud)
IO-Link, Number of ports 1
IO-Link, Process data content OUT 1-bit (move in) 1-bit (move out) 1-bit (quit error)
IO-Link, Process data content IN 1-bit (state device) 1-bit (state move) 1-bit (state in) 1-bit (state out)
IO-Link, Min. cycle time 1 ms

Productos relacionados

8102168
Festo
$957,82
8102171
Festo
$977,75
8101546
Festo
$901,03
8102169
Festo
$953,84
8102166
Festo
$949,86
8102170
Festo
$955,30
8102163
Festo
$939,38
8101544
Festo
$890,96
8101542
Festo
$890,53
8102164
Festo
$947,34
8102167
Festo
$967,28
8101545
Festo
$894,30
8102162
Festo
$943,38
8101539
Festo
$877,13
8101541
Festo
$883,82
8101540
Festo
$880,49
$965,80
Stock 1 uds.
Referencia 8102165
Fabricante Festo
Unidades Precio / Unidad
1+ $965,80

Explora la serie Festo EPCE
  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros