0

8118301 Festo

FESTO 8118301 Unidad de cilindro eléctrico

EPCS-BS-60-300-12P-A-ST-M-H1-PLK-AA

$1.479,43 Stock Limitado solo disponible bajo consulta

Especificaciones

Series (EPCS) Electric cylinder
Drive system (BS) Ball screw drive
Size (60) 60
Stroke [mm] (300) 300
Spindle pitch (12P) 12 mm
Position sensing (A) For proximity sensor
Motor type (ST) Stepper motor ST
Controller (M) Integrated
Control panel (H1) Integrated
Bus protocol/activation (PLK) PNP and IO-Link®
End-position sensing (AA) With integrated end-position sensing
Cable outlet direction Standard
Motor attachment position Standard
Electrical accessories None
Logic interface, connection technology M12x1, A-coded according to EN 61076-2-101
Switching logic for outputs NPN (negative switching) PNP (positive switching)
Logic interface, connection type Plug
Logic interface, plug pattern 00992264
Note on materials RoHS-compliant
Material piston rod High-alloy stainless steel
Material spindle Rolled steel
Stroke 300 mm
Piston rod thread M12x1.25
Spindle diameter 12 mm
Torsional backlash at piston rod +/- 1 deg
Piston-rod end Male thread
Design Electric cylinder With ball screw drive With integrated drive
Symbol 00997294
Referencing Positive fixed stop block Negative fixed stop block Reference switch
Rotor position sensor, encoder measuring principle Magnetic
Display LED
Max. acceleration 5 m/s²
Repetition accuracy ±0.02 mm
Duty cycle 100%
Max. current digital logic outputs 100 mA
Nominal voltage DC 24 V
Parameterisation interface IO-Link User interface
Permissible voltage fluctuations +/- 15%
power supply, connection system M12x1, T-coded according to EN 61076-2-111
Power supply, connection pattern 00995989
KC mark KC-EMV
CE marking (see declaration of conformity) To UK instructions for EMC To UK RoHS instructions
Shock resistance Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27
LABS (PWIS) conformity VDMA24364 zone III
Relative air humidity 0 - 90% Non-condensing
Ambient temperature 0 °C ... 50 °C
Max. moment Mx 0 Nm
Max. moment Mz 6,4 Nm
Max. feed force Fx 375 N
Reference value effective load, vertical 18 kg
Additional moving mass per 10 mm stroke 6,5 g
Basic weight for 0 mm stroke 2.294 g
Number of digital logic outputs 24 V DC 2
Specification logic input Based on IEC 61131-2, type 1
Features of logic input Configurable Not galvanically isolated
IO-Link, Protocol version Device V 1.1
IO-Link, Port class A
IO-Link, Process data length OUT 2 bytes
IO-Link, Process data length IN 2 bytes
IO-Link, Service data IN 32-bit force 32-bit position 32-bit speed
IO-Link, Data storage required 500 Byte
Max. cable length 15 m outputs 15 m inputs 20 m with IO-Link® operation
Switching logic for inputs NPN (negative switching) PNP (positive switching)
Logic interface, number of pins/wires 8
Type of mounting Via female thread With accessories
Material housing Smooth-anodised wrought aluminium alloy
Material spindle nut Steel
Size 60
Stroke reserve 0 mm
Reversing backlash theoretical 100 µm
Spindle pitch 12 mm/U
Mounting position optional
Type of motor Stepper motor
Spindle type Ball screw drive
Protection against torque/guide With plain-bearing guide
Rotor position sensor Absolute single-turn encoder
Additional functions User interface Integrated end-position sensing
Ready status indication LED
Max. speed 0,22 m/s
Features of digital logic outputs Configurable Not galvanically isolated
Insulation protection class B
Max. current consumption 5.300 mA
Nominal current 5,3 A
Rotor position transducer resolution 16 bit
Power supply, connection type Plugs
Power supply, number of pins/wires 4
Approval RCM trademark
CE mark (see declaration of conformity) To EU EMC Directive In accordance with EU RoHS Directive
Vibration resistance Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Corrosion resistance class CRC 0 - No corrosion stress
Storage temperature -20 °C ... 60 °C
Degree of protection IP40
Note on ambient temperature Power must be reduced by 2% per K at ambient temperatures above 30°C.
Max. moment My 6,4 Nm
Max. radial force at drive shaft 230 N
Reference value effective load, horizontal 56 kg
Moving mass for 0 mm stroke 305 g
Product weight 4.364 g
Additional weight per 10 mm stroke 69 g
Number of digital logic inputs 2
Working range of logic input 24 V
IO-Link, SIO-Mode support Yes
IO-Link, communication mode COM3 (230.4 kBaud)
IO-Link, Number of ports 1
IO-Link, Process data content OUT 1-bit (move in) 1-bit (move out) 1-bit (quit error)
IO-Link, Process data content IN 1-bit (state device) 1-bit (state move) 1-bit (state in) 1-bit (state out)
IO-Link, Min. cycle time 1 ms

Productos relacionados

8118292
FESTO
$1.479,43
8118290
FESTO
$1.441,49
8118294
FESTO
$1.559,05
8118297
FESTO
$1.551,31
8118302
FESTO
$1.541,08
8118300
FESTO
$1.460,47
8118288
FESTO
$1.403,57
8118293
FESTO
$1.541,08
8118286
FESTO
$1.344,78
8118304
FESTO
$1.766,21
8118296
FESTO
$1.384,60
8118289
FESTO
$1.422,54
8118303
FESTO
$1.560,05
8118287
FESTO
$1.530,35
8118295
FESTO
$1.766,21
8118298
FESTO
$1.422,54
$1.479,43
Stock Pedir cotización
Referencia 8118301
Fabricante FESTO
Unidades Precio / Unidad
1+ $1.479,43

Explora la serie FESTO EPCS
  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros