Note on materials | RoHS-compliant | ||
Stroke | 30 mm ... 1.500 mm | ||
Spindle diameter | 32 mm | ||
Based on standard | ISO 15552 | ||
Type of motor | Servo motor | ||
Design | Electric cylinder with ball screw | ||
Symbol | 991.941 | ||
Protection against torque/guide | With plain-bearing guide | ||
Corrosion resistance class CRC | 0 - No corrosion stress 2 - Moderate corrosion stress | ||
Suitability for the production of Li-ion batteries | Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils | ||
Storage temperature | -20 °C ... 60 °C | ||
Relative air humidity | 0 - 95% | ||
Ambient temperature | 0 °C ... 60 °C | ||
Max. feed force Fx | 12.000 N | ||
Reference value effective load, vertical | 1.200 kg | ||
Additional moving mass per 10 mm stroke | 103 g | ||
Additional weight per 10 mm stroke | 155 g | ||
Interface code, actuator | D80 | ||
Material piston rod | High-alloy stainless steel | ||
Material spindle nut | Rolled steel | ||
Material cylinder barrel | Smooth-anodised wrought aluminium alloy |
Size | 80 | ||
Piston rod thread | M20x1.5 | ||
Torsional backlash at piston rod +/- | 0,5 deg | ||
Mounting position | optional | ||
Position detection | Via proximity switch | ||
Spindle type | Ball screw | ||
Variants | Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. | ||
Duty cycle | 100% | ||
LABS (PWIS) conformity | VDMA24364 zone III | ||
Cleanroom class | Class 7 according to ISO 14644-1 | ||
Suitable for use with food | See supplementary material information | ||
Degree of protection | IP40 | ||
Max. radial force at drive shaft | 1.100 N | ||
Reference value effective load, horizontal | 1.200 kg | ||
Moving mass for 0 mm stroke | 5.300 g | ||
Basic weight for 0 mm stroke | 7.393 g | ||
Type of mounting | Via female thread Or accessories | ||
Material cover | Cast aluminium, coated | ||
Material screws | Galvanised steel | ||
Material spindle | Rolled steel |