| Flange length | L1 | 68 | mm |
| Distance from locking device side face to raceway centre | s1 | 18,30 | mm |
| Bore diameter | d | 20 | mm |
| Centring diameter | Dc | 52 | mm |
| Overall width | A | 27 | mm |
| Standout of end cover | A5 | 54,10 | mm |
| Distance from locking device side face to thread centre | B4 | 4,50 | mm |
| Overall height | H | 114 | mm |
| Overall length | L | 68 | mm |
| Diameter of attachment bolt hole | N | 11,50 | mm |
| Overall unit width | T | 35 | mm |
| outer diameter inner ring | da | ≈28.2 | |
| Groove height for backseal | Ha | 6 | mm |
| Flange width | A | 15 | mm |
| Overall bearing width | B | 31 | mm |
| Distance between attachment bolt holes | J | 22 | mm |
| Radial position of the spherical seat | H1 | 43 | mm |
