| Diameter lubrication hole (outer ring) | M | 2 | mm |
| Chamfer dimension outer ring | r1,2 | min.0.6 | |
| Outside diameter | d2 | 42 | mm |
| Width Outer ring | C | 16 | mm |
| Raceway diameter inner ring | F | 35,50 | mm |
| Width annular lubrication groove at outer ring | b | 3,10 | mm |
| Chamfer dimension bore | r1 | min.0.6 | |
| Bore diameter | d | 25 | mm |
| Nominal width | B | 25 | mm |
| Angle of tilt | α | 4 | ° |
| Shoulder diameter cylindrical extension inner ring | d1 | ≈30.5 | |
| Width annular lubrication groove at inner ring | b1 | 3,20 | mm |
| Fabricante | Referencia |
|---|---|
| INA | GE25-LO (INA) |
