| Basic dynamic load rating, radial | Cr | 48,300 | |
| Bore diameter bearing | d | 25 | mm |
| Width inner ring, | B | 25 | mm |
| Basic static load rating, radial | C0r | 69,900 | |
| Outside diameter bearing | D | 42 | mm |
| Ball diameter | dK | 35,50 | mm |
| Outer eye diameter | d2 | 58 | mm |
| Shank diameter | d4 | 30 | mm |
| Width of the rod end | C1 | 21 | mm |
| Thread length Internal thread | l3 | 29 | mm |
| Distance drilling with/shaft start | l7 | 27 | mm |
| Shank diameter, large | d5 | 54 | mm |
| Edge Spacing | r1smin | 0,60 | mm |
| Cylinder Force | FZ | 32,000 | |
| Bore diameter bearing, upper tolerance | dOT | 0,02 | mm |
| Width inner ring, lower tolerance | BUT | -0,21 | mm |
| Outer flange diameter inner ring | d1 | 30,50 | mm |
| Thread size | d3 | M20x1,5 | |
| Shank Length Internal thread head | h1 | 65 | mm |
| Tilt angle | α | 4 | ° |
| Total length internal thread head | l4 | 94 | mm |
| Welding Shank Diameter | d 7 | M8x20 | |
| Width | B | 17 | mm |
| Radial Clearance | Gr | 0,037 - 0,1 | |
| Tightening torque | MA | 32 | Nm |
| Bore diameter bearing, tolerance | dT | H7 |
| Fabricante | Referencia |
|---|---|
| SKF | SIQG25 ES (SKF) |
