| Ball diameter | dK | 35,50 | mm |
| Outer eye diameter | d2 | 56 | mm |
| Shank diameter | d4 | 25 | mm |
| Width of the rod end | C1 | 23 | mm |
| Thread length Internal thread | l3 | 17 | mm |
| Distance drilling with/shaft start | l7 | 25 | mm |
| Shank diameter, large | d5 | 41 | mm |
| Radial Clearance | Gr | 0,037 - 0,1 | |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
| Outer flange diameter inner ring | d1 | 29,30 | mm |
| Thread size | d3 | M16x1,5 | |
| Shank Length Internal thread head | h1 | 50 | mm |
| Tilt angle | α | 7 | ° |
| Total length internal thread head | l4 | 78 | mm |
| Welding Shank Diameter | d 7 | M8x25 | |
| Edge Spacing | r1smin | 0,60 | mm |
| Tightening torque | MA | 32 | Nm |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Bore diameter bearing | d | 25 | mm |
| Width inner ring, | B | 20 | mm |
| Basic static load rating, radial | C0r | 65,500 |
| Outside diameter bearing | D | 42 | mm |
| Basic dynamic load rating, radial | Cr | 48,300 |
| Fabricante | Referencia |
|---|---|
| Pavarini Components | TAPR25N |
| Pavarini Components | TAPR25U |
| SKF | SIR25 ES (SKF) |
| SKF | SIRD25ES |
| Rexroth | CGAK16 |
| Elges | GIHR25DO |
| Hung | GK25NKS |
| Rexroth | R900303162 |
| WSW Wälzlager | WAPR25N |
