Ball diameter | dK | 47 | mm |
Outer eye diameter | d2 | 78 | mm |
Shank diameter | d4 | 40 | mm |
Width of the rod end | C1 | 30 | mm |
Thread length Internal thread | l3 | 29 | mm |
Distance drilling with/shaft start | l7 | 38 | mm |
Shank diameter, large | d5 | 58 | mm |
Radial Clearance | Gr | 0,037 - 0,1 | |
Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
Outer flange diameter inner ring | d1 | 39,80 | mm |
Thread size | d3 | M28x1,5 | |
Shank Length Internal thread head | h1 | 70 | mm |
Tilt angle | α | 6 | ° |
Total length internal thread head | l4 | 109 | mm |
Welding Shank Diameter | d 7 | M10x30 | |
Edge Spacing | r1smin | 0,60 | mm |
Tightening torque | MA | 64 | Nm |
Width inner ring, lower tolerance | BUT | -0,12 | mm |
Bore diameter bearing | d | 35 | mm |
Width inner ring, | B | 25 | mm |
Basic static load rating, radial | C0r | 140,000 |
Outside diameter bearing | D | 55 | mm |
Basic dynamic load rating, radial | Cr | 79,900 |
Fabricante | Referencia |
---|---|
Pavarini Components | TAPR35N |
Pavarini Components | TAPR35U |
SKF | SIR35 ES (SKF) |
SKF | SIRD35ES |
Elges | GIHR35DO |
REXROTH | CGAK28 |
Hung | GK35NKS |
WSW Wälzlager | WAPR35N |
REXROTH | R900303164 (REXROTH) |