| Ball diameter | dK | 53 | mm |
| Outer eye diameter | d2 | 94 | mm |
| Shank diameter | d4 | 49 | mm |
| Width of the rod end | C1 | 35 | mm |
| Thread length Internal thread | l3 | 36 | mm |
| Distance drilling with/shaft start | l7 | 45 | mm |
| Shank diameter, large | d5 | 66 | mm |
| Radial Clearance | Gr | 0,043 - 0,12 | |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
| Outer flange diameter inner ring | d1 | 45 | mm |
| Thread size | d3 | M35x1,5 | |
| Shank Length Internal thread head | h1 | 85 | mm |
| Tilt angle | α | 7 | ° |
| Total length internal thread head | l4 | 132 | mm |
| Welding Shank Diameter | d 7 | M10x35 | |
| Edge Spacing | r1smin | 0,60 | mm |
| Tightening torque | MA | 64 | Nm |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Bore diameter bearing | d | 40 | mm |
| Width inner ring, | B | 28 | mm |
| Basic static load rating, radial | C0r | 228,000 |
| Outside diameter bearing | D | 62 | mm |
| Basic dynamic load rating, radial | Cr | 99,100 |
| Fabricante | Referencia |
|---|---|
| Pavarini Components | TAPR40N |
| Pavarini Components | TAPR40U |
| SKF | SIR40 ES (SKF) |
| SKF | SIRD40ES |
| Rexroth | R900303165 (REXROTH) |
| Rexroth | CGAK35 |
| Elges | GIHR-K40DO |
| Hung | GK40NKS |
| WSW Wälzlager | WAPR40N |
| SKC | 9051304 |
