| Outside diameter bearing | D | 22 | mm |
| Basic dynamic load rating, radial | Cr | 18,100 | |
| Bore diameter bearing | d | 10 | mm |
| Width inner ring | B | 14 | mm |
| Basic static load rating, radial | C0r | 18,500 |
| Edge Spacing | r1smin | 0,30 | mm |
| Ball diameter | dK | 19,05 | mm |
| Outer eye diameter | d2 | 28 | mm |
| Shank diameter | d4 | 15 | mm |
| Width of the rod end | C1 | 10,50 | mm |
| Thread length Internal thread | l3 | 20 | mm |
| length rod end shank | l5 | 6,50 | mm |
| Shank diameter, large | d5 | 19 | mm |
| Radial Clearance | Gr | 0 - 0,035 | |
| Bore diameter bearing, tolerance | dT | H7 |
| Outer flange diameter inner ring | d1 | 12,90 | mm |
| Thread size | d3 | M10 | |
| Shank Length Internal thread head | h1 | 43 | mm |
| Tilt angle | α | 13 | ° |
| Total length internal thread head | l4 | 57 | mm |
| Distance drilling with/shaft start | l7 | 15 | mm |
| Width Across Flat | W | 17 | mm |
| Bore diameter bearing, upper tolerance | dOT | 0,02 | mm |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Fabricante | Referencia |
|---|---|
| Durbal | BEF10-20-501 (DURBAL) |
| IKO | PHS10-EC (IKO) |
| REXROTH | 8958206402 |
| Elges | GIKFR10PW |
| WSW Wälzlager | SIK10C |
| LFD | KI10-DRS |
| Askubal | KJ10-D |
| Hirschmann | SFCP10 |
| SKF | SIKAB10T |
| SKF | SIKB10 F (SKF) |
| SMC | KJ10DA |
