| Outside diameter bearing | D | 28 | mm |
| Basic dynamic load rating, radial | Cr | 31,000 | |
| Bore diameter bearing | d | 14 | mm |
| Width inner ring | B | 19 | mm |
| Basic static load rating, radial | C0r | 32,000 |
| Edge Spacing | r1smin | 0,30 | mm |
| Ball diameter | dK | 25,40 | mm |
| Outer eye diameter | d2 | 36 | mm |
| Shank diameter | d4 | 21 | mm |
| Width of the rod end | C1 | 13,50 | mm |
| Thread length Internal thread | l3 | 25 | mm |
| length rod end shank | l5 | 8 | mm |
| Shank diameter, large | d5 | 26 | mm |
| Radial Clearance | Gr | 0 - 0,035 | |
| Bore diameter bearing, tolerance | dT | H7 |
| Outer flange diameter inner ring | d1 | 16,80 | mm |
| Thread size | d3 | M14 | |
| Shank Length Internal thread head | h1 | 57 | mm |
| Tilt angle | α | 16 | ° |
| Total length internal thread head | l4 | 75 | mm |
| Distance drilling with/shaft start | l7 | 18 | mm |
| Width Across Flat | W | 22 | mm |
| Bore diameter bearing, upper tolerance | dOT | 0,02 | mm |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Fabricante | Referencia |
|---|---|
| Durbal | BEF14-20-501 (DURBAL) |
| SMC | KJ14DA |
| IKO | PHS14-EC (IKO) |
| WSW Wälzlager | SIK14C |
| LFD | KI14D |
| Askubal | KJ14-D |
| Hirschmann | SFCP14 |
| SKF | SIKB14 F (SKF) |
| SKF | SIKAB14T |
