| Outside diameter bearing | D | 35 | mm |
| Basic dynamic load rating, radial | Cr | 26,200 | |
| Radial Clearance | Gr | 0 - 0,035 |
| Width inner ring | B | 23 | mm |
| Basic static load rating, radial | C0r | 36,900 | |
| Bore diameter bearing | d | 18 | mm |
| Ball diameter | dK | 31,75 | mm |
| Outer eye diameter | d2 | 46 | mm |
| Shank diameter | d4 | 25 | mm |
| Tilt angle | α | 15 | ° |
| Total length internal thread head | l4 | 94,50 | mm |
| Distance drilling with/shaft start | l7 | 23 | mm |
| Width of the rod end | C1 | 16,50 | mm |
| Width Across Flat | W | 27 | mm |
| Bore diameter bearing, tolerance | dT | H7 |
| Outer flange diameter inner ring | d1 | 21,90 | mm |
| Thread size | d3 | M18x1,5 | |
| Shank Length Internal thread head | h1 | 71 | mm |
| Thread length Internal thread | l3 | 27 | mm |
| length rod end shank | l5 | 10 | mm |
| Shank diameter, large | d5 | 31 | mm |
| Edge Spacing | r1smin | 0,30 | mm |
| Bore diameter bearing, upper tolerance | dOT | 0,02 | mm |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Fabricante | Referencia |
|---|---|
| SKF | SIKAC18-M (SKF) |
