Bore diameter bearing | d | 30 | mm |
Width inner ring | B | 37 | mm |
Basic static load rating, radial | C0r | 95,900 |
Outside diameter bearing | D | 55 | mm |
Basic dynamic load rating, radial | Cr | 114,000 |
Edge Spacing | r1smin | 0,30 | mm |
Ball diameter | dK | 50,80 | mm |
Outer eye diameter | d2 | 70 | mm |
Shank diameter | d4 | 40 | mm |
Width of the rod end | C1 | 25 | mm |
Thread length Internal thread | l3 | 51 | mm |
length rod end shank | l5 | 15 | mm |
Shank diameter, large | d5 | 50 | mm |
Radial Clearance | Gr | 0 - 0,035 | |
Bore diameter bearing, tolerance | dT | H7 |
Outer flange diameter inner ring | d1 | 34,80 | mm |
Thread size | d3 | M30x2 | |
Shank Length Internal thread head | h1 | 110 | mm |
Tilt angle | α | 17 | ° |
Total length internal thread head | l4 | 145 | mm |
Distance drilling with/shaft start | l7 | 37 | mm |
Width Across Flat | W | 41 | mm |
Bore diameter bearing, upper tolerance | dOT | 0,02 | mm |
Width inner ring, lower tolerance | BUT | -0,12 | mm |
Fabricante | Referencia |
---|---|
Durbal | BEF30-20-501 (DURBAL) |
Elges | GIKFR30PW |
LFD | KI30D |
Askubal | KJ30-D |
SMC | KJ30D |
Hirschmann | SFCP30 |
Stock | 50+ uds. |
---|---|
Referencia | GIKR30-PW |
Fabricante | INA |
Unidades | Precio / Unidad |
---|---|
1 - 4 | $177,42 |
5 - 9 | $173,87 |
10 - 14 | $170,33 |
15+ | $166,78 |