Bore diameter bearing | d | 12 | mm |
Width inner ring | B | 10 | mm |
Basic static load rating, radial | C0r | 30,400 |
Outside diameter bearing | D | 22 | mm |
Basic dynamic load rating, radial | Cr | 11,300 |
Edge Spacing | r1smin | 0,30 | mm |
Ball diameter | dK | 18 | mm |
Outer eye diameter | d2 | 34 | mm |
Shank diameter | d4 | 17,50 | mm |
Width of the rod end | C1 | 8 | mm |
Thread length Internal thread | l3 | 23 | mm |
length rod end shank | l5 | 6,50 | mm |
Shank diameter, large | d5 | 22 | mm |
Radial Clearance | Gr | 0 - 0,032 | |
Width inner ring, lower tolerance | BUT | -0,12 | mm |
Outer flange diameter inner ring | d1 | 14,90 | mm |
Thread size | d3 | M12 | |
Shank Length Internal thread head | h1 | 50 | mm |
Tilt angle | α | 11 | ° |
Total length internal thread head | l4 | 67 | mm |
Distance drilling with/shaft start | l7 | 18 | mm |
Width Across Flat | W | 19 | mm |
Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
Fabricante | Referencia |
---|---|
Durbal | EF12-20-502 (DURBAL) |
Elges | GIL12UK |
SKF | SIL12-C (SKF) |