| Bore diameter bearing | d | 25 | mm |
| Width inner ring | B | 20 | mm |
| Basic static load rating, radial | C0r | 105,000 |
| Outside diameter bearing | D | 42 | mm |
| Basic dynamic load rating, radial | Cr | 51,100 |
| Edge Spacing | r1smin | 0,60 | mm |
| Ball diameter | dK | 35,50 | mm |
| Outer eye diameter | d2 | 64 | mm |
| Shank diameter | d4 | 33,50 | mm |
| Width of the rod end | C1 | 17 | mm |
| Thread length Internal thread | l3 | 48 | mm |
| length rod end shank | l5 | 12 | mm |
| Shank diameter, large | d5 | 42 | mm |
| Radial Clearance | Gr | 0 - 0,05 | |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Outer flange diameter inner ring | d1 | 29,30 | mm |
| Thread size | d3 | M24x2 | |
| Shank Length Internal thread head | h1 | 94 | mm |
| Tilt angle | α | 7 | ° |
| Total length internal thread head | l4 | 126 | mm |
| Distance drilling with/shaft start | l7 | 32 | mm |
| Width Across Flat | W | 36 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
| Fabricante | Referencia |
|---|---|
| Durbal | EF25-20-501 (DURBAL) |
| Askubal | EJ25-D |
| SKF | SI25DC |
| SKF | SI25-C (SKF) |
