| Outer flange diameter inner ring | d1 | 13,20 | mm |
| Welding Shank Diameter | d 7 | 15 | mm |
| Width of the rod end | C1 | 7 | mm |
| Total length welding head | l6 | 38,50 | mm |
| Chamfer | l8 | 2 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0,01 | mm |
| Ball diameter | dK | 16 | mm |
| Outer eye diameter | d2 | 29 | mm |
| Shank Length Welding Head | h2 | 24 | mm |
| Tilt angle | α | 12 | ° |
| Distance drilling with/shaft start | l7 | 15 | mm |
| Centering pin diameter | d7 | 3 | mm |
| Width inner ring, lower tolerance | BUT | -0,12 | mm |
| Bore diameter bearing | d | 10 | mm |
| Width inner ring, | B | 9 | mm |
| Basic static load rating, radial | C0r | 15,600 |
| Outside diameter bearing | D | 19 | mm |
| Basic dynamic load rating, radial | Cr | 8,160 | |
| Radial Clearance | Gr | 0,023 - 0,068 |
| Edge Spacing | r1smin | 0,30 | mm |
